5.6 good. 5.8 bad. I didn't know anyone ran 5.8 with sipx with huge success. Weren't there tracker items on that? ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431
Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: Josh Patten <[email protected]> Cc: [email protected] <[email protected]> Sent: Fri May 14 17:46:00 2010 Subject: Re: [sipx-users] sipXecs 4.2 voicemail allows only 10 seconds of recording before disconnecting On 10-05-14 9:25 AM, Josh Patten wrote: > Did you ever find a fix to this? I'm curious if so because I will be > updating to 4.2 tonight (I use audiocodes gateways) > and I was hoping I would be able to fix this before it was ever a problem. I now see the following errors. After 10 seconds, the AudioCodes is reporting: FXO Release Line Guard_Time_Timer_Expired_EV On my second test, I saw this: RELEASE_BECAUSE_IP_TIMER_EXPIRED_EV Since I didn't want to take the chance of upgrading the firmware on my AudioCodes MP-118 FXO from 5.2 to 5.6 without a fallback, I configured a gateway account for VOIP.MS on Monday. I couldn't get the account to register and haven't had a chance to report the details yet. This morning we had a "power event" and one of my 2 6KVA UPS had bad batteries so half my servers shut down (all the ones with a single power supply plugged into the bad UPS). When the AudioCodes came back up, the boss placed an outbound call to Houston for a conference attendee who couldn't call in. They used this line for about 2 hours. When the conference ended, I power cycled the AudioCodes, and lost all contact with it. I took it to my supplier who recovered the device by installing the 5.8 firmware. My original configuration was intact. I realized why it stopped functioning - it was configured ith the IP addresses of my backup sipXecs server. I hadn't burned the flash after cutting over to my new sipXecs 4.2 server. So I have a PSTN connection again. Voicemail still disconnects after 10 seconds. I made the following 2 changes to look like the configuration defaults in sipXecs for AudioCodes: Subscription Mode and Authentication Mode - changed "per Endpoint" to "per Gateway" Alas, to no avail. -- Norman Branitsky +1 416.798.7948 Cherniak Software Development Corporation Fax: +1 416.798.0948 509-2001 Sheppard Avenue East [email protected] Toronto, ON M2J 4Z8 sip:[email protected] Canada http://www.CherniakSoftware.com _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
