The polycom issue is different. If the remote phone is on a connection that is not connected to a fast enough network, it does that.
I have a 512k bridge for a small satellite location. Just two phones on it, nothing else. As soon as I updated to 3.2.3 it had that problem. I never did anything to update those phones other than activate the upload. When I activated it, all phones rebooted. That sucked. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Sent: Fri May 14 18:09:37 2010 Subject: Re: [sipx-users] sipXecs 4.2 voicemail allows only 10 seconds of recording before disconnecting Also, I ran tests on the community opensuse-build-service CentOS 5 64 bit version and I didn't have any problem leaving voicemails 2 or 3 minutes long. I also didn't see the ring-once-then-goto-voicemail polycom issue others were experiencing either. Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676 On 5/14/2010 5:08 PM, Josh Patten wrote: > On 4.0.4 at least > > and not managed by sipX > > Josh Patten > Assistant Network Administrator > Brazos County IT Dept. > (979) 361-4676 > > > On 5/14/2010 5:07 PM, Josh Patten wrote: > >> I run 5.8 on my mediant 1000 with no problems. >> >> Josh Patten >> Assistant Network Administrator >> Brazos County IT Dept. >> (979) 361-4676 >> >> >> On 5/14/2010 5:07 PM, Tony Graziano wrote: >> >> >>> 5.6 good. 5.8 bad. >>> >>> I didn't know anyone ran 5.8 with sipx with huge success. Weren't there >>> tracker items on that? >>> ============================ >>> Tony Graziano, Manager >>> Telephone: 434.984.8430 >>> Fax: 434.984.8431 >>> >>> Email: [email protected] >>> >>> LAN/Telephony/Security and Control Systems Helpdesk: >>> Telephone: 434.984.8426 >>> Fax: 434.984.8427 >>> >>> Helpdesk Contract Customers: >>> http://www.myitdepartment.net/gethelp/ >>> >>> ----- Original Message ----- >>> From: [email protected] >>> <[email protected]> >>> To: Josh Patten<[email protected]> >>> Cc: [email protected]<[email protected]> >>> Sent: Fri May 14 17:46:00 2010 >>> Subject: Re: [sipx-users] sipXecs 4.2 voicemail allows only 10 seconds >>> of >>> recording before disconnecting >>> >>> On 10-05-14 9:25 AM, Josh Patten wrote: >>> >>> >>> >>>> Did you ever find a fix to this? I'm curious if so because I will be >>>> updating to 4.2 tonight (I use audiocodes gateways) >>>> and I was hoping I would be able to fix this before it was ever a >>>> problem. >>>> >>>> >>>> >>> I now see the following errors. >>> After 10 seconds, the AudioCodes is reporting: >>> >>> FXO Release Line >>> Guard_Time_Timer_Expired_EV >>> >>> On my second test, I saw this: >>> >>> RELEASE_BECAUSE_IP_TIMER_EXPIRED_EV >>> >>> Since I didn't want to take the chance of upgrading the firmware on my >>> AudioCodes MP-118 FXO >>> from 5.2 to 5.6 without a fallback, I configured a gateway account for >>> VOIP.MS on Monday. >>> I couldn't get the account to register and haven't had a chance to >>> report the details yet. >>> >>> This morning we had a "power event" and one of my 2 6KVA UPS had bad >>> batteries >>> so half my servers shut down (all the ones with a single power supply >>> plugged into the bad UPS). >>> When the AudioCodes came back up, the boss placed an outbound call to >>> Houston for a conference >>> attendee who couldn't call in. They used this line for about 2 hours. >>> >>> When the conference ended, I power cycled the AudioCodes, and lost all >>> contact with it. >>> I took it to my supplier who recovered the device by installing the 5.8 >>> firmware. >>> My original configuration was intact. I realized why it stopped >>> functioning - >>> it was configured ith the IP addresses of my backup sipXecs server. I >>> hadn't burned the flash >>> after cutting over to my new sipXecs 4.2 server. >>> >>> So I have a PSTN connection again. >>> Voicemail still disconnects after 10 seconds. >>> I made the following 2 changes to look like the configuration defaults >>> in sipXecs for AudioCodes: >>> Subscription Mode and Authentication Mode - changed "per Endpoint" to >>> "per Gateway" >>> Alas, to no avail. >>> >>> >>> >>> >> _______________________________________________ >> sipx-users mailing list [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> sipXecs IP PBX -- http://www.sipfoundry.org/ >> >> > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
