I run 5.8 on my mediant 1000 with no problems. Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676
On 5/14/2010 5:07 PM, Tony Graziano wrote: > 5.6 good. 5.8 bad. > > I didn't know anyone ran 5.8 with sipx with huge success. Weren't there > tracker items on that? > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: [email protected] > <[email protected]> > To: Josh Patten<[email protected]> > Cc: [email protected]<[email protected]> > Sent: Fri May 14 17:46:00 2010 > Subject: Re: [sipx-users] sipXecs 4.2 voicemail allows only 10 seconds of > recording before disconnecting > > On 10-05-14 9:25 AM, Josh Patten wrote: > >> Did you ever find a fix to this? I'm curious if so because I will be >> updating to 4.2 tonight (I use audiocodes gateways) >> and I was hoping I would be able to fix this before it was ever a problem. >> > I now see the following errors. > After 10 seconds, the AudioCodes is reporting: > > FXO Release Line > Guard_Time_Timer_Expired_EV > > On my second test, I saw this: > > RELEASE_BECAUSE_IP_TIMER_EXPIRED_EV > > Since I didn't want to take the chance of upgrading the firmware on my > AudioCodes MP-118 FXO > from 5.2 to 5.6 without a fallback, I configured a gateway account for > VOIP.MS on Monday. > I couldn't get the account to register and haven't had a chance to > report the details yet. > > This morning we had a "power event" and one of my 2 6KVA UPS had bad > batteries > so half my servers shut down (all the ones with a single power supply > plugged into the bad UPS). > When the AudioCodes came back up, the boss placed an outbound call to > Houston for a conference > attendee who couldn't call in. They used this line for about 2 hours. > > When the conference ended, I power cycled the AudioCodes, and lost all > contact with it. > I took it to my supplier who recovered the device by installing the 5.8 > firmware. > My original configuration was intact. I realized why it stopped > functioning - > it was configured ith the IP addresses of my backup sipXecs server. I > hadn't burned the flash > after cutting over to my new sipXecs 4.2 server. > > So I have a PSTN connection again. > Voicemail still disconnects after 10 seconds. > I made the following 2 changes to look like the configuration defaults > in sipXecs for AudioCodes: > Subscription Mode and Authentication Mode - changed "per Endpoint" to > "per Gateway" > Alas, to no avail. > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
