I assume Patton do the voice detection then? Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676
On 6/10/2010 6:15 PM, Tony Graziano wrote: > I don't know of ANY sip device that will do that. There are "particular" > things I have found gateways do not do. Send digits after connecting and say > they are connected when they are not. > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: [email protected] > <[email protected]> > To: [email protected]<[email protected]> > Sent: Thu Jun 10 19:00:01 2010 > Subject: Re: [sipx-users] Audiocodes gateways disable voice detection > > I'm at my wits end. If I turn off all voice activity detection it simply > leaves the call in early media (disconnecting it at 60 seconds) > Is there any way to make the audiocodes show the call as "answered" > immediately after dialing? > > Josh Patten > Assistant Network Administrator > Brazos County IT Dept. > (979) 361-4676 > > > On 6/10/2010 9:30 AM, Josh Patten wrote: > >> Due to the really crappy copper infrastructure in my area analog phone >> lines have a lot of issues (mainly with echo and voice cutting out) with >> audiocodes gateways which is remedied by tuning the incoming and >> outgoing gain. If the voice gain is too high there is a lot of cutting >> out and echo. The side effect of going to low on the gain (in or out) is >> sometimes the "voice activity detector" doesn't ever realize there is >> someone on the other side of the line, effectively leaving the call in >> an early media state (the timer on the phone never starts, the call >> isn't "officially" connected) which eventually disconnects. >> >> What I would like to do is disable voice activity detection altogether >> and have the call connected immediately and the timer started when an >> outbound call is made, no early media involved. I have tried playing >> with all sorts of settings in the Audiocodes but nothing seems to make >> this happen. Could anyone point me in the right direction? >> _______________________________________________ >> sipx-users mailing list [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> sipXecs IP PBX -- http://www.sipfoundry.org/ >> >> > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
