If they have any more trouble I'll probably buy a Patton gateway for them if what you say is true but I would like to know for sure.
I don't have to tinker with my audiocodes M1000 PRI unit or the FXS devices once they're set up, it's the outbound calling on the FXO devices that does this. I think I've managed to get the VAD working properly now but I'll know soon enough. On 06/10/2010 06:56 PM, Tony Graziano wrote: > I've never had to touch that setting. I think the timer starts when the > telco switch connects (as in starts ringing). > > It wasn't meant as a comparison. I just never have to fiddle with them once > I set them up, so I really don't run into all this stuff. > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: Josh Patten<[email protected]> > To: Tony Graziano<[email protected]> > Cc: [email protected]<[email protected]> > Sent: Thu Jun 10 19:30:31 2010 > Subject: Re: [sipx-users] Audiocodes gateways disable voice detection > > Let's not turn this into a gateway manufacturer comparison > > Let me rephrase the question: > > What happens on you Polycom phone when you dial through your patton FXO > gateway? Does the call timer immediately start when the phone starts > ringing? Does the call timer start when someone answers the phone? If > the former, then that is what I want but can't seem to get the > audiocodes to do. If the latter, then the Patton is doing VAD to > determine when early media should end. > > Josh Patten > Assistant Network Administrator > Brazos County IT Dept. > (979) 361-4676 > > > On 6/10/2010 6:27 PM, Tony Graziano wrote: > >> I haven't found anything they don't do that's reasonable. >> >> My issue with audiocodes is always tje reliabilituy factor. I like the >> "ronco-ness, set it and forget it" aspect with Patton. >> ============================ >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> Fax: 434.984.8431 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> Fax: 434.984.8427 >> >> Helpdesk Contract Customers: >> http://www.myitdepartment.net/gethelp/ >> >> ----- Original Message ----- >> From: Josh Patten<[email protected]> >> To: Tony Graziano<[email protected]> >> Cc: [email protected]<[email protected]> >> Sent: Thu Jun 10 19:16:28 2010 >> Subject: Re: [sipx-users] Audiocodes gateways disable voice detection >> >> I assume Patton do the voice detection then? >> >> Josh Patten >> Assistant Network Administrator >> Brazos County IT Dept. >> (979) 361-4676 >> >> >> On 6/10/2010 6:15 PM, Tony Graziano wrote: >> >> >>> I don't know of ANY sip device that will do that. There are "particular" >>> things I have found gateways do not do. Send digits after connecting and >>> say >>> they are connected when they are not. >>> ============================ >>> Tony Graziano, Manager >>> Telephone: 434.984.8430 >>> Fax: 434.984.8431 >>> >>> Email: [email protected] >>> >>> LAN/Telephony/Security and Control Systems Helpdesk: >>> Telephone: 434.984.8426 >>> Fax: 434.984.8427 >>> >>> Helpdesk Contract Customers: >>> http://www.myitdepartment.net/gethelp/ >>> >>> ----- Original Message ----- >>> From: [email protected] >>> <[email protected]> >>> To: [email protected]<[email protected]> >>> Sent: Thu Jun 10 19:00:01 2010 >>> Subject: Re: [sipx-users] Audiocodes gateways disable voice detection >>> >>> I'm at my wits end. If I turn off all voice activity detection it simply >>> leaves the call in early media (disconnecting it at 60 seconds) >>> Is there any way to make the audiocodes show the call as "answered" >>> immediately after dialing? >>> >>> Josh Patten >>> Assistant Network Administrator >>> Brazos County IT Dept. >>> (979) 361-4676 >>> >>> >>> On 6/10/2010 9:30 AM, Josh Patten wrote: >>> >>> >>> >>>> Due to the really crappy copper infrastructure in my area analog phone >>>> lines have a lot of issues (mainly with echo and voice cutting out) with >>>> audiocodes gateways which is remedied by tuning the incoming and >>>> outgoing gain. If the voice gain is too high there is a lot of cutting >>>> out and echo. The side effect of going to low on the gain (in or out) is >>>> sometimes the "voice activity detector" doesn't ever realize there is >>>> someone on the other side of the line, effectively leaving the call in >>>> an early media state (the timer on the phone never starts, the call >>>> isn't "officially" connected) which eventually disconnects. >>>> >>>> What I would like to do is disable voice activity detection altogether >>>> and have the call connected immediately and the timer started when an >>>> outbound call is made, no early media involved. I have tried playing >>>> with all sorts of settings in the Audiocodes but nothing seems to make >>>> this happen. Could anyone point me in the right direction? >>>> _______________________________________________ >>>> sipx-users mailing list [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users >>>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>>> sipXecs IP PBX -- http://www.sipfoundry.org/ >>>> >>>> >>>> >>>> >>> _______________________________________________ >>> sipx-users mailing list [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users >>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>> sipXecs IP PBX -- http://www.sipfoundry.org/ >>> >>> >>> _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
