5400 is still not shipping (yet). They promised me one to test with but it seems they have missed their target date a bit to make the transcoding model available to the general public.
On Fri, Jan 28, 2011 at 12:08 PM, Josh M. Patten <[email protected]>wrote: > Patton has SBC's for this very purpose. The Smartnode 5200 and 5400 (5400 > does transcoding) > ------------------------------ > *From:* [email protected] [ > [email protected]] on behalf of Nathaniel Watkins [ > [email protected]] > *Sent:* Thursday, January 27, 2011 9:27 PM > *To:* Discussion list for users of sipXecs software > > *Subject:* Re: [sipx-users] SBC for port translation > > Just thought I’d throw this out there… > > > > We have a Patton 4960 gateway that has a public IP address (WAN port) that > uses IP based registration to connect to voip.ms (in the routing table – > we only allow traffic on the WAN port to/from the ip address of the > voip.ms server we are registering to). We are doing this so our legacy > NEC system can route long distance calls via voip.ms for the cheaper long > distance. > > > > You could point sipXecs to route calls to the Patton and let the Patton > send the calls to voip.ms (and vice versa). It’s an expensive option if > you don’t already have a PRI gateway that can register a SIP trunk – but it > would allow you to keep your traffic on 5060 and keep sipXecs out of the > mix. Plus you still have the option of letting remote workers into sipXecs. > > > > > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Michael Scheidell > *Sent:* Thursday, January 27, 2011 5:05 PM > *To:* [email protected] > *Subject:* Re: [sipx-users] SBC for port translation > > > > On 1/27/11 4:46 PM, Matt White wrote: > > I'm sure it offers no consolation, but we have several customers (including > our personal corporate system) using VOIP.MS. We do not, and have never > used any other translation than a plain port forward for inbound 5060 to > translate to 5080. > > and you are using IP BASED REGISTRATION? not user/password? > > when you look at their diagnostics it shows port 5060,? > because if I use user/password registration, we go out FROM port 5080, and > voip.ms responds back on port 5080. > > > -- > Michael Scheidell, CTO > o: 561-999-5000 > d: 561-948-2259 > ISN: 1259*1300 > > *| *SECNAP Network Security Corporation > > - Certified SNORT Integrator > - 2008-9 Hot Company Award Winner, World Executive Alliance > - Five-Star Partner Program 2009, VARBusiness > - Best in Email Security,2010: Network Products Guide > - King of Spam Filters, SC Magazine 2008 > > > ------------------------------ > > This email has been scanned and certified safe by SpammerTrap®. > For Information please see http://www.secnap.com/products/spammertrap/ > ------------------------------ > > > > ------------------------------ > This message and any files transmitted with it are intended only for the > individual(s) or entity named. If you are not the intended individual(s) or > entity named you are hereby notified that any disclosure, copying, > distribution or reliance upon its contents is strictly prohibited. If you > have received this in error, please notify the sender, delete the original, > and destroy all copies. Email transmissions cannot be guaranteed to be > secure or error-free as information could be intercepted, corrupted, lost, > destroyed, arrive late or incomplete, or contain viruses. Garrett County > Government therefore does not accept any liability for any errors or > omissions in the contents of this message, which arise as a result of email > transmission. > > > Garrett County Government, > 203 South Fourth Street, Courthouse, Oakland, Maryland 21550 > www.garrettcounty.org > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net <http://support.myitdepartment.net>Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
