On Apr 9, 2011, at 6:07 AM, Tony Graziano wrote: > I have done this with in gate but not with patton. > > It would need to be in the itsp dial plan. But it sounds as though it might > be problematic if the I t s p insists on adding the characters on outbound > calls anyway. It would not matter if you strip them and then they added it > back again. You might still have the same issue. > > Typically I see this bandwidth.com and I created a dial plan its effects to > strip those characters so when the caller id shows in the call log on a > polycom phone the proxy strips the characters and sends 10 digits. >
Tony, Can you describe the dial plan to strip the +1 on the inbound leg from the ITSP so polycom see's 10 digits? I have implemented a few attempts but must have missed something to get it right as the +1 still arrives to the polycom "Call Lists". Thanks, Trevor Benson A1 Networks | Network Engineer dCAP, Network+, CLA, CNA, MCP
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
