I have a post on my blog that explains the dial plan that I use for bandwidth.com. if you search for bandwidth.com on my blog there is a pdf where I think I explained this. ===================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected]
LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/ tony-graziano/14/4a6/7a4 On Apr 11, 2011 11:53 AM, "Tony Graziano" <[email protected]> wrote: > I use an external Sbc for that. You can strip the digits from the proxy on > outbound though... > > ===================== > Tony Graziano, Manager Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.326.5325 > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 > > sip: [email protected] > > Helpdesk Contract Customers: http://support.myitdepartment.net > > Blog: http://blog.myitdepartment.net > > Linked-In Profile: http://www.linkedin.com/pub/ tony-graziano/14/4a6/7a4 > On Apr 11, 2011 11:22 AM, "Trevor Benson" <[email protected]> wrote: >> On Apr 9, 2011, at 6:07 AM, Tony Graziano wrote: >> >>> I have done this with in gate but not with patton. >>> >>> It would need to be in the itsp dial plan. But it sounds as though it > might be problematic if the I t s p insists on adding the characters on > outbound calls anyway. It would not matter if you strip them and then they > added it back again. You might still have the same issue. >>> >>> Typically I see this bandwidth.com and I created a dial plan its effects > to strip those characters so when the caller id shows in the call log on a > polycom phone the proxy strips the characters and sends 10 digits. >>> >> >> Tony, >> >> Can you describe the dial plan to strip the +1 on the inbound leg from the > ITSP so polycom see's 10 digits? I have implemented a few attempts but must > have missed something to get it right as the +1 still arrives to the polycom > "Call Lists". >> >> Thanks, >> Trevor Benson >> A1 Networks | Network Engineer >> dCAP, Network+, CLA, CNA, MCP >>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
