Did you send profiles to the phones (and have them reboot) - I'd only do this for a single phone first.
Nathaniel Watkins IT Director Garrett County Government 203 South 4th Street, Room 210 Oakland, MD 21550 Telephone: 301-334-5001 Fax: 301-334-5021 E-mail: [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Matthew Kitchin (public/usenet) Sent: Monday, April 25, 2011 1:44 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] EFK and 4.4? That is what I did. I uploaded the config file, then assigned it in phone groups, group, polycom 450, Custom Configuration. It doesn't seem to have any affect at all. On 4/25/2011 12:36 PM, Tony Graziano wrote: > you only add the config file and tones (if desired), then upload the > custom efk file and assign in 4.4. > > On Mon, Apr 25, 2011 at 1:24 PM, Matthew Kitchin (public/usenet) > <[email protected]> wrote: >> I didn't replace the 3 files. I'm still confused. The guide below >> explains how to edit /etc/sipxpbx/polycom/polycom_sip.cfg >> I thought the way this was supposed to work was you could add your >> own supplementary files for a given phone group. >> >> On 4/25/2011 11:37 AM, Tony Graziano wrote: >>> you skip the part of replacing the three files in 4.4. >>> >>> http://wiki.sipfoundry.org/display/sipXecs/Polycom+Phone+Customizati >>> on >>> >>> >>> On Mon, Apr 25, 2011 at 12:19 PM, Matthew Kitchin (public/usenet) >>> <[email protected]> wrote: >>>> I'm sure I'm missing something obvious here. >>>> Are there some simple steps to using the EFK settings in 4.4? I'm >>>> following bits and pieces of directions from different places. >>>> This site assumes 4.2.1 >>>> http://sites.google.com/site/sipxecstipsandtricks/polycom-phones >>>> This site seems to refer to editing the master conf file >>>> http://wiki.sipfoundry.org/display/sipXecs/Polycom+Phone+Customizat >>>> ion This is the jira item, but I still don't see where to use it: >>>> http://track.sipfoundry.org/browse/XX-8725 >>>> >>>> I'm not sure where to do what. I used the template file provided by >>>> Jim to rule out I was doing something wrong with my config file. I >>>> uploaded it as an unmanaged TFTP file and activated it. I tried >>>> putting the file name in Phone groups, group, Custom Configuration. >>>> That doesn't seem to do anything. >>>> Can anyone give me some steps for using this in 4.4? Sorry I >>>> _______________________________________________ >>>> sipx-users mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ This message and any files transmitted with it are intended only for the individual(s) or entity named. If you are not the intended individual(s) or entity named you are hereby notified that any disclosure, copying, distribution or reliance upon its contents is strictly prohibited. If you have received this in error, please notify the sender, delete the original, and destroy all copies. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Garrett County Government therefore does not accept any liability for any errors or omissions in the contents of this message, which arise as a result of email transmission. Garrett County Government, 203 South Fourth Street, Courthouse, Oakland, Maryland 21550 www.garrettcounty.org _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
