You whacky developers with your tricky naming schemes...
On Aug 4, 2011 6:20 PM, "George Niculae" <[email protected]> wrote:
> On Fri, Aug 5, 2011 at 1:17 AM, Michael Picher <[email protected]> wrote:
>> Looks like it may have been back-ported to 4.2.1 but I don't think a new
>> build has been cranked for 4.2.1.
>> Mike
>>
>
> Actually was not backported, read master-4.2 as release-4.6. For
> sipxecs 4.2.1 there is release-4.2
>
> George
>
>> On Thu, Aug 4, 2011 at 6:14 PM, Tony Graziano <
[email protected]>
>> wrote:
>>>
>>> I'm mighty certain it is:
>>> http://track.sipfoundry.org/browse/XX-9699
>>> If so, no amount of staring at it will fix it for you in 4.2.
>>>
>>> On Thu, Aug 4, 2011 at 6:11 PM, Jeff Gilmore <[email protected]>
wrote:
>>>>
>>>> Thanks Josh.  Not sure that applies, though, since I am not running a
4.4
>>>> version and that looked like a new bug in 4.4.  I will eventually
update to
>>>> 4.4, but I have had so much user downtime lately due to ITSP issues,
that I
>>>> just can't face it!
>>>> The behavior on the Polycom looks like what happens when a second call
>>>> comes in when you are already on the line, but of course, there is only
the
>>>> one call.
>>>> Anyone interested in looking at a trace?
>>>> Thanks,
>>>> Jeff
>>>> On Aug 4, 2011, at 3:32 PM, Josh Patten wrote:
>>>>
>>>> This may be related to a bug regarding PRACK:
>>>> http://track.sipfoundry.org/browse/XX-9699
>>>>
>>>> the only suggestion I have at this point is to upgrade to the latest
4.4
>>>> release
>>>>
>>>>
>>>> On Thu, Aug 4, 2011 at 1:05 PM, Jeff Gilmore <[email protected]>
>>>> wrote:
>>>>>
>>>>> I have a problem that has cropped up recently.  My extensions are
mostly
>>>>> served by SPA2102 ATA devices, but on a particular extension, I have
both a
>>>>> Polycom IP320 and an SPA2102 ATA registered.  Until recently, it
worked
>>>>> great and I could pick up incoming calls on either one.
>>>>>
>>>>> Now, if I receive an incoming call and try to pick it up on the
Polycom,
>>>>> it seems to grab the call, but the phone displays
<answer><ignore><more> ,
>>>>> and pressing answer does not pick up the call.  The call stops
ringing, but
>>>>> I get dead air on the Polycom.  It used to just pick up.  The SPA2102
picks
>>>>> up calls just fine.
>>>>>
>>>>> This only happens with calls that come through my ITSP--local calls
work
>>>>> fine.  On these outside calls, on the caller's phone, it stops giving
a ring
>>>>> tone and acts like it has been picked up, but they get dead air.  I
see the
>>>>> callerID of the caller appear on the Polycom.
>>>>>
>>>>> There were some recent changes caused by problems on my ITSP's side.
>>>>>  They moved my account to a new proxy  server and a new SBC, so I had
to
>>>>> change the IP address in my Sipx gateway configuration.  I am running
>>>>> Polycom 3.1.3.0439 firmware, but that has not changed.  I am running
sipx
>>>>> 4.2.1.
>>>>>
>>>>> Any suggestions of what might be wrong?  I have traces of both a
>>>>> (failed) Polycom call and a (successful) SPA2102 call if you are
willing to
>>>>> take a look at them.
>>>>>
>>>>> Thanks!
>>>>>
>>>>> Jeff
>>>>> _______________________________________________
>>>>> sipx-users mailing list
>>>>> [email protected]
>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>>>
>>>>
>>>>
>>>> --
>>>> Josh Patten
>>>> eZuce
>>>> Solutions Architect
>>>> O.978-296-1005 X2050
>>>> M.979-574-5699
>>>> _______________________________________________
>>>> sipx-users mailing list
>>>> [email protected]
>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>>>
>>>> _______________________________________________
>>>> sipx-users mailing list
>>>> [email protected]
>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>>
>>>
>>>
>>> --
>>> ======================
>>> Tony Graziano, Manager
>>> Telephone: 434.984.8430
>>> sip: [email protected]
>>> Fax: 434.326.5325
>>>
>>> Email: [email protected]
>>>
>>> LAN/Telephony/Security and Control Systems Helpdesk:
>>> Telephone: 434.984.8426
>>> sip: [email protected]
>>>
>>> Helpdesk Contract Customers:
>>> http://support.myitdepartment.net
>>> Blog:
>>> http://blog.myitdepartment.net
>>>
>>> Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
>>> Ask about our voip fax services!
>>>
>>> _______________________________________________
>>> sipx-users mailing list
>>> [email protected]
>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>
>>
>>
>> --
>> Michael Picher
>> eZuce
>> Director of Technical Services
>> O.978-296-1005 X2015
>> M.207-956-0262
>> @mpicher <http://twitter.com/mpicher>
>> www.ezuce.com
>>
>>
>> _______________________________________________
>> sipx-users mailing list
>> [email protected]
>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to