Hi, My DNS is configured for round-robin, my three servers have the same weight and priority, when I do a DIG I can see that round-robin is working properly:
first DIG: _sip._tcp.webcti.local. 1800 IN SRV 1 0 5060 ps0sipx01.webcti.local. _sip._tcp.webcti.local. 1800 IN SRV 1 0 5060 ps0sipx02.webcti.local. _sip._tcp.webcti.local. 1800 IN SRV 1 0 5060 ps0sipx03.webcti.local. second DIG: _sip._tcp.webcti.local. 1800 IN SRV 1 0 5060 ps0sipx02.webcti.local. _sip._tcp.webcti.local. 1800 IN SRV 1 0 5060 ps0sipx03.webcti.local. _sip._tcp.webcti.local. 1800 IN SRV 1 0 5060 ps0sipx01.webcti.local. third DIG: _sip._tcp.webcti.local. 1800 IN SRV 1 0 5060 ps0sipx03.webcti.local. _sip._tcp.webcti.local. 1800 IN SRV 1 0 5060 ps0sipx01.webcti.local. _sip._tcp.webcti.local. 1800 IN SRV 1 0 5060 ps0sipx02.webcti.local. So with 16 Bria users I should have at least one on the second or third server but it's not the case. 2011/9/6 Michael Picher <[email protected]> > You can modify bind in how it returns DNS values to the clients... you're > kind of out of luck on Windows DNS servers. > > Consult the Oracle: > http://wiki.sipfoundry.org/display/sipXecs/DNS+Concepts+for+sipXecs > > See next to last section regarding Polycom issues. > > Thanks, > Mike > > > On Tue, Sep 6, 2011 at 4:30 AM, <[email protected]> wrote: > >> There is no relation between the provisioning server and the server where >> a phone will register. >> The provisioning server is just that; the place where a phone, in this >> case Bria, gets its configuration files. >> When it has the config it will register based on the information in there. >> If the sip domain has more then 1 sip SRV records with equal priority then >> Bria will pick one of them. >> I do remember that newer Bria's always picks the first SRV, so if your DNS >> does not "round-robin" the replies then all Bria's will register with >> the first server. >> This is however not caused by provisioning as such, but by the way DNS and >> Bria work. >> >> Paul >> >> cyril constantin <[email protected]> wrote on 06-09-2011 09 >> :48:00: >> >> > Hi Guys, >> > >> > I have configured several users with Bria 3 with provisioning, my >> > provisioning URL is my Primary Sipxecs servers so all my users are >> > registered to this primary server and doesn't load balance to others >> > cluster server, so do there is any way to keep the ability to use >> > DNS SRV for load balacing when using provisioning? >> > >> > Thanks a lot in advance for your feedback. >> > >> > Best Regards. >> > >> > Cyril_______________________________________________ >> > sipx-users mailing list >> > [email protected] >> > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > Michael Picher > eZuce > Director of Technical Services > O.978-296-1005 X2015 > M.207-956-0262 > @mpicher <http://twitter.com/mpicher> > www.ezuce.com > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
