callcentric is not rfc3261 compliant. if you search the archives of the user list you'll see a lot of discussion to that end.
I think the only thing they normally bring to the table are low rates australia. at the same time you could just get a truck with Nehos from au andbe done with that. On Sep 16, 2011 8:05 AM, "Tim Byng" <[email protected]> wrote: > I have found that transfers (blind or assisted) and conference calls do not > work either. Is this to be expected with CallCentric? If so, then I guess > they're not an option. > > All of this works as expected with voip.ms. > > Has anyone been able to get this to work with CallCentric? > > Regards, > Tim > > On Thu, Sep 15, 2011 at 3:11 PM, Tim Byng <[email protected]> wrote: > >> I was contemplating not putting CallCentric in the subject of this email, >> as I know they're generally not recommended with sipXecs and some of you may >> not even read this. However, I'm running out of options. I won't get into it >> here, but my choices are very limited, so if I can get CallCentric to work >> with sipXecs, I'm happy. >> >> So far I have the basics working. Both inbound and outbound calls seem to >> be working as expected (minus the inbound caller id name, but I've only >> tested one number so far). However, I just ran into a problem where an >> external line will not ring when I set a call forwarding rule for a user. >> Here are the scenarios: >> >> - OK: Landline -> voip.ms DID -> sipXecs -> internal extension -> >> voip.ms -> external number >> - OK: Landline -> callcentric DID -> sipXecs -> internal extension -> >> voip.ms -> external number >> - Not OK: Landline -> voip.ms DID -> sipXecs -> internal extension -> >> callcentric -> external number >> - Not OK: Landline -> callcentric DID -> sipXecs -> internal extension >> -> callcentric -> external number >> >> In all cases, the internal extension rings. However, when callcentric is >> used to forward the number, the external number does not ring. >> >> Is this a known issue with CallCentric? If someone was able to get this to >> work, what steps did you take? >> >> Are there any other limitations with CallCentric that I should know about? >> >> Regards, >> Tim >>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
