Could I get that last message in braille please? On Fri, Sep 16, 2011 at 8:08 AM, Tony Graziano <[email protected] > wrote:
> callcentric is not rfc3261 compliant. if you search the archives of the > user list you'll see a lot of discussion to that end. > > I think the only thing they normally bring to the table are low rates > australia. at the same time you could just get a truck with Nehos from au > andbe done with that. > On Sep 16, 2011 8:05 AM, "Tim Byng" <[email protected]> wrote: > > I have found that transfers (blind or assisted) and conference calls do > not > > work either. Is this to be expected with CallCentric? If so, then I guess > > they're not an option. > > > > All of this works as expected with voip.ms. > > > > Has anyone been able to get this to work with CallCentric? > > > > Regards, > > Tim > > > > On Thu, Sep 15, 2011 at 3:11 PM, Tim Byng <[email protected]> wrote: > > > >> I was contemplating not putting CallCentric in the subject of this > email, > >> as I know they're generally not recommended with sipXecs and some of you > may > >> not even read this. However, I'm running out of options. I won't get > into it > >> here, but my choices are very limited, so if I can get CallCentric to > work > >> with sipXecs, I'm happy. > >> > >> So far I have the basics working. Both inbound and outbound calls seem > to > >> be working as expected (minus the inbound caller id name, but I've only > >> tested one number so far). However, I just ran into a problem where an > >> external line will not ring when I set a call forwarding rule for a > user. > >> Here are the scenarios: > >> > >> - OK: Landline -> voip.ms DID -> sipXecs -> internal extension -> > >> voip.ms -> external number > >> - OK: Landline -> callcentric DID -> sipXecs -> internal extension -> > >> voip.ms -> external number > >> - Not OK: Landline -> voip.ms DID -> sipXecs -> internal extension -> > >> callcentric -> external number > >> - Not OK: Landline -> callcentric DID -> sipXecs -> internal extension > >> -> callcentric -> external number > >> > >> In all cases, the internal extension rings. However, when callcentric is > >> used to forward the number, the external number does not ring. > >> > >> Is this a known issue with CallCentric? If someone was able to get this > to > >> work, what steps did you take? > >> > >> Are there any other limitations with CallCentric that I should know > about? > >> > >> Regards, > >> Tim > >> > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher eZuce Director of Technical Services O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
