first things first... ditch 3.2.5... use either 3.2.4b or 3.2.6 (not widely tested but believed to be good).
also, in internet calling make sure to limit the ip networks to just the local network on the sipxecs server. mike On Thu, Nov 17, 2011 at 2:43 PM, John Clark <[email protected]> wrote: > Hey guys. Hope all is well.**** > > ** ** > > I have some remote polycoms that seem to work fine, except the WMI doesn’t > light when they receive a message. They are on private NATd networks (one > at user home, and other at a remote office). **** > > ** ** > > I think this is a network issue because when I plug them into the LAN > local to the Sipx 4.2 box it works fine, and all the phones are on the > Polycom 3.2.5 combined release. **** > > ** ** > > Just not sure what I am missing since the SIP signaling and media seem to > work fine with respect to placing and receiving calls, MOH, VM, etc.**** > > **** > > Just wondered if you had a suggestion.**** > > ** ** > > Thanks a bunch.**** > > ** ** > > John Clark > SBS Proactive LLC > Fort Worth: 817-834-0364 x201 > Dallas: 972-248-4455 x201 > [email protected] > www.sbsproactive.com**** > > ** ** > > ** ** > > ** ** > > ** ** > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square**** Suite 201**** Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
