you are being vague if it is connected without nat the remote subnet should be included. On Nov 17, 2011 6:13 PM, "John Clark" <[email protected]> wrote:
> I only have my local 192.168.99.0/24 in intranet subnets section. (This > is different from the remote local subnets also.)**** > > I will give 3.2.6 a shot.**** > > ** ** > > Thanks.**** > > ** ** > > John**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Michael Picher > *Sent:* Thursday, November 17, 2011 3:10 PM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] Remote Polycom MWI**** > > ** ** > > first things first... ditch 3.2.5... use either 3.2.4b or 3.2.6 (not > widely tested but believed to be good).**** > > ** ** > > also, in internet calling make sure to limit the ip networks to just the > local network on the sipxecs server.**** > > ** ** > > mike**** > > On Thu, Nov 17, 2011 at 2:43 PM, John Clark <[email protected]> > wrote:**** > > Hey guys. Hope all is well.**** > > **** > > I have some remote polycoms that seem to work fine, except the WMI doesn’t > light when they receive a message. They are on private NATd networks (one > at user home, and other at a remote office). **** > > **** > > I think this is a network issue because when I plug them into the LAN > local to the Sipx 4.2 box it works fine, and all the phones are on the > Polycom 3.2.5 combined release. **** > > **** > > Just not sure what I am missing since the SIP signaling and media seem to > work fine with respect to placing and receiving calls, MOH, VM, etc.**** > > **** > > Just wondered if you had a suggestion.**** > > **** > > Thanks a bunch.**** > > **** > > John Clark > SBS Proactive LLC > Fort Worth: 817-834-0364 x201 > Dallas: 972-248-4455 x201 > [email protected] > www.sbsproactive.com**** > > **** > > **** > > **** > > **** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > > > **** > > ** ** > > -- > Michael Picher, Director of Technical Services > eZuce, Inc.**** > > 300 Brickstone Square**** > > Suite 201**** > > Andover, MA. 01810**** > > O.978-296-1005 X2015 > M.207-956-0262 > @mpicher <http://twitter.com/mpicher> > www.ezuce.com**** > > ** ** > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
