On the install of 4.4, I used the hostname and had the installer install
DHCP and DNS as well. There are no other DNS servers on the network.
This is why I do not understand why I have to 'fix' my DNS. Isn't sipX
supposed to config everything correctly on install (assuming I entered
the right values during setup)?
If using hostname is a valid setup, than why did ext to ext calls not
work without adding DNS aliases under System>Domain (per Tod's
instructions). Tony said I should not have to do that, but instead I
needed to fix my DNS, and, if I understand his last email on this
correctly, this is why the v-mail indicator LED does not work. But,
again, if the install set up the DNS config and I made no changes then
why is DNS broken?
Right now everything works except the v-mail indicator (I've not
completed remote phone testing).
So, being willing to do whatever is needed to get sipX up and running, I
honestly do not care if I use domain or hostname for setup. Can I
easily switch from using hostname to domain without doing a reinstall?
I'm happy to fix my DNS if someone will help me understand why it was
broken to begin with being that it is the only DNS server on the network
and it was using the default config.
Stiles
On 04/01/2012 06:46 PM, Michael Picher wrote:
You have to pick a method when you setup the system... You either
setup with a domain or you setup with a host name. if you setup with
a domain and then try to move to a host name, that's different...
Mike
On Fri, Mar 30, 2012 at 3:04 PM, Stiles Watson <[email protected]
<mailto:[email protected]>> wrote:
I'll be happy to fix whatever is broken, but please help me
understand first.
Are you saying that the problem results from my extensions
registering as [email protected] <mailto:[email protected]>
instead of [email protected] <mailto:[email protected]>?
In a previous post I was told by someone that if I have no
intention of adding additional servers, I can use host.domain.com
<http://host.domain.com> as the sip domain during install instead
of domain.com <http://domain.com> and this is a perfectly
acceptable solution and that this results in basically an A record
setup instead of a SRV record setup. Is this not the case?
You've mentioned a few time that I need to "Fix my DNS," which I'm
very willing to do, but I've also been told that the DNS should be
setup correctly on install since I'm installing DNS on the same
server during the sipX install. There are no other DNS servers on
the network.
If I have to go back to [email protected] <mailto:[email protected]> do
I have to do another reinstall or is there another way to switch over?
Stiles
On 03/30/2012 02:21 PM, Tony Graziano wrote:
Its the fact you are registering to the host name instead of the
domain.
Fix your DNS.
On Mar 30, 2012 1:41 PM, "Stiles Watson" <[email protected]
<mailto:[email protected]>> wrote:
I just noticed that since I upgraded sipX to 4.4 and my
Polycom IP 335
phones to firmware 3.2.6 and BootROM 4.2.2, I no longer get a
v-mail
notification on the Phones. The message indicator LED does
not flash and
there is no indication on the display except "1 new missed call".
I do not know enough yet to know if the issue is with
sipX/Polycom
interoperability or with firmware or with the BootROM.
Any clues?
Stiles
_______________________________________________
sipx-users mailing list
[email protected]
<mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-users/
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426 <tel:434.984.8426>
sip: [email protected]
<mailto:[email protected]>
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
[email protected] <mailto:[email protected]>
List Archive:http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
[email protected] <mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
Michael Picher, Director of Technical Services
eZuce, Inc.
300 Brickstone Square
Suite 201
Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
www.ezuce.com <http://www.ezuce.com>
------------------------------------------------------------------------------------------------------------
There are 10 kinds of people in the world, those who understand binary
and those who don't.
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/
