no. On Mon, Apr 2, 2012 at 5:28 PM, Stiles Watson <[email protected]>wrote:
> When I used sipx.mycompany.com, ext to ext calls would not work without > adding aliases to Server>Domain. And even then, the V-mail indicator does > not work. > > Is there a way to switch back to using mycompany.com as the sip domain > without a reinstall? > > Stiles > > > On 04/02/2012 05:13 PM, Michael Picher wrote: > > | Then when asked for SIP domain, do I have to enter mycompany.com OR is > entering sipx.mycompany.com expectable? > > If you want A-Record resolution and you will never add another server, > you can use sipx.mycompany.com. If you want to add another server at a > later time or use XMPP to mycompany.com in the future, I would use > mycompany.com (which should be the default response). > > Mike > > > On Mon, Apr 2, 2012 at 5:04 PM, Stiles Watson <[email protected]>wrote: > >> So as an example: >> >> I want to use the company domain for the sip domain and I want the sip >> sub net to be the same as the LAN (192.168.111.xxx), during install, when >> asked for the Network settings, I enter >> >> Hostname: sipx.mycompany.com >> IP: 192.168.111.111 (static IP of sipX server) >> Netmask: 255.255.255.0 >> Gateway: 192.168.111.1 (static LAN IP of my Sonicwall firewall) >> >> I then select "No - sipx.mycompany.com SHOULD be my DNS server" to >> install DNS on the sipX server. >> >> On the next screen I then enter the IP addresses of two DNS servers on >> the Internet. >> b >> Then when asked if I have a DHCP server on my network, I select "No - >> sipx.mycompany.com SHOULD be my DHCP server." Now, for my setup, the >> Sonicwall has DHCP running on it but only for static IPs within a specified >> range. So after the install, I edit the dhcpd.conf file and change the >> range of the DHCP server on sipX so there is no overlap. This allows all >> dynaic IPs to be handled by the sipX server. >> >> I then select, "First Server" >> >> Then when asked for SIP domain, do I have to enter mycompany.com OR is >> entering sipx.mycompany.com expectable? >> >> I then select "Reboot" >> >> On my first login after reboot, I perform a "yum update," reboot again, >> and then begin the sipX config via the web interface. >> >> Is there anything wrong with this example? >> >> Stiles >> >> >> >> On 04/02/2012 04:27 PM, Tony Graziano wrote: >> >> When you setup sipx, the most reliable way to configure it is: >> >> sipdomain.tld >> and hostname.sipdomain.tld as two different values. >> >> when a phone registers it should register to >> "[email protected]"<[email protected]> >> >> Ultimately it DOES NOT MATTER where DHCP and DNS come from, so long as >> it is accurate and works without delays. For best performance on a single >> system and if there are no network reasons "not to", you are best off to >> let sipx handle both services or contains sipx services on its own vlan so >> it doesn't interfere. I normally use a subdomain for sipx services, but not >> always, and that's "my" way of doing it. >> >> If the phone is registering to the hostname, the phone MWI is to the >> domain name and its not answering the challenge for MWI subscription >> BECAUSE the subscriber IS [email protected], NOT [email protected] >> . >> >> The reality is all of this is a big exhale... it's all in the wiki. >> While there are numerous threads, they all point back to the same issue. >> DNS. >> >> This is how I would do i if I were you, but I am not you (since people >> tire of my "if it were me..."). >> >> I do this the same each and every time. I never have registration >> issues. I never have MWI issues and I never have issues calling inside to >> other subscribers. >> >> >> >> On Mon, Apr 2, 2012 at 4:09 PM, Stiles Watson <[email protected]>wrote: >> >>> On the install of 4.4, I used the hostname and had the installer >>> install DHCP and DNS as well. There are no other DNS servers on the >>> network. This is why I do not understand why I have to 'fix' my DNS. Isn't >>> sipX supposed to config everything correctly on install (assuming I entered >>> the right values during setup)? >>> >>> If using hostname is a valid setup, than why did ext to ext calls not >>> work without adding DNS aliases under System>Domain (per Tod's >>> instructions). Tony said I should not have to do that, but instead I needed >>> to fix my DNS, and, if I understand his last email on this correctly, this >>> is why the v-mail indicator LED does not work. But, again, if the install >>> set up the DNS config and I made no changes then why is DNS broken? >>> >>> Right now everything works except the v-mail indicator (I've not >>> completed remote phone testing). >>> >>> So, being willing to do whatever is needed to get sipX up and running, I >>> honestly do not care if I use domain or hostname for setup. Can I easily >>> switch from using hostname to domain without doing a reinstall? >>> >>> I'm happy to fix my DNS if someone will help me understand why it was >>> broken to begin with being that it is the only DNS server on the network >>> and it was using the default config. >>> >>> Stiles >>> >>> >>> >>> On 04/01/2012 06:46 PM, Michael Picher wrote: >>> >>> You have to pick a method when you setup the system... You either setup >>> with a domain or you setup with a host name. if you setup with a domain >>> and then try to move to a host name, that's different... >>> >>> Mike >>> >>> On Fri, Mar 30, 2012 at 3:04 PM, Stiles Watson >>> <[email protected]>wrote: >>> >>>> I'll be happy to fix whatever is broken, but please help me understand >>>> first. >>>> >>>> Are you saying that the problem results from my extensions registering >>>> as [email protected] instead of [email protected]? >>>> >>>> In a previous post I was told by someone that if I have no intention of >>>> adding additional servers, I can use host.domain.com as the sip domain >>>> during install instead of domain.com and this is a perfectly >>>> acceptable solution and that this results in basically an A record setup >>>> instead of a SRV record setup. Is this not the case? >>>> >>>> You've mentioned a few time that I need to "Fix my DNS," which I'm very >>>> willing to do, but I've also been told that the DNS should be setup >>>> correctly on install since I'm installing DNS on the same server during the >>>> sipX install. There are no other DNS servers on the network. >>>> >>>> If I have to go back to [email protected] do I have to do another >>>> reinstall or is there another way to switch over? >>>> >>>> Stiles >>>> >>>> >>>> On 03/30/2012 02:21 PM, Tony Graziano wrote: >>>> >>>> Its the fact you are registering to the host name instead of the domain. >>>> >>>> Fix your DNS. >>>> On Mar 30, 2012 1:41 PM, "Stiles Watson" <[email protected]> >>>> wrote: >>>> >>>>> I just noticed that since I upgraded sipX to 4.4 and my Polycom IP 335 >>>>> phones to firmware 3.2.6 and BootROM 4.2.2, I no longer get a v-mail >>>>> notification on the Phones. The message indicator LED does not flash >>>>> and >>>>> there is no indication on the display except "1 new missed call". >>>>> >>>>> I do not know enough yet to know if the issue is with sipX/Polycom >>>>> interoperability or with firmware or with the BootROM. >>>>> >>>>> Any clues? >>>>> >>>>> Stiles >>>>> _______________________________________________ >>>>> sipx-users mailing list >>>>> [email protected] >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>> >>>> >>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>> Telephone: 434.984.8426 >>>> sip: [email protected] >>>> >>>> Helpdesk Customers: http://myhelp.myitdepartment.net >>>> Blog: http://blog.myitdepartment.net >>>> >>>> >>>> _______________________________________________ >>>> sipx-users mailing [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>>> >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >>> >>> >>> -- >>> Michael Picher, Director of Technical Services >>> eZuce, Inc. >>> >>> 300 Brickstone Square >>> >>> Suite 201 >>> >>> Andover, MA. 01810 >>> O.978-296-1005 X2015 <978-296-1005%20X2015> >>> M.207-956-0262 >>> @mpicher <http://twitter.com/mpicher> >>> www.ezuce.com >>> >>> >>> ------------------------------------------------------------------------------------------------------------ >>> There are 10 kinds of people in the world, those who understand binary >>> and those who don't. >>> >>> >>> >>> _______________________________________________ >>> sipx-users mailing [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >>> >>> >>> _______________________________________________ >>> sipx-users mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> >> -- >> ~~~~~~~~~~~~~~~~~~ >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: [email protected] >> Fax: 434.465.6833 >> ~~~~~~~~~~~~~~~~~~ >> Linked-In Profile: >> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> Ask about our Internet Fax services! >> ~~~~~~~~~~~~~~~~~~ >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected] >> >> Helpdesk Customers: http://myhelp.myitdepartment.net >> Blog: http://blog.myitdepartment.net >> >> >> _______________________________________________ >> sipx-users mailing [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > Michael Picher, Director of Technical Services > eZuce, Inc. > > 300 Brickstone Square > > Suite 201 > > Andover, MA. 01810 > O.978-296-1005 X2015 > M.207-956-0262 > @mpicher <http://twitter.com/mpicher> > www.ezuce.com > > > ------------------------------------------------------------------------------------------------------------ > There are 10 kinds of people in the world, those who understand binary and > those who don't. > > > > _______________________________________________ > sipx-users mailing [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ~~~~~~~~~~~~~~~~~~ Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 ~~~~~~~~~~~~~~~~~~ Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services! ~~~~~~~~~~~~~~~~~~ -- LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
