No. I thought I sent you a 4960 config some time ago. The most recent one I put on the wiki does work in conjunction with the 4424 profile I already gave you though.
I'm sure if it doesnt work after comparing, patton can fix with you though. On Thu, Apr 19, 2012 at 12:38 PM, Becker, Jesse <[email protected]>wrote: > Tony, > I had guessed the no as I thought it would be similar to Cisco. The issue > was that you have to omit the number (ie. 2) for it to work. > > Any ideas on why it still isn't does t.38? Do I need to make the same > modifications you sent me for the 4424 to the SN4950 (T1 gateway) ? > > Thanks, > > Jes > > On Thu, Apr 19, 2012 at 12:19 PM, Tony Graziano < > [email protected]> wrote: > >> no *codec 2 g711alaw64k rx-length 20 tx-length 20* >> >> >> On Thu, Apr 19, 2012 at 11:27 AM, Jesse Becker <[email protected]>wrote: >> >>> Tony, >>> I modified my profile voip default. It didn't accept some of the >>> command, and the configuration is now: >>> * >>> profile voip default >>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>> codec 2 transparent-clearmode rx-length 20 tx-length 20 >>> no dtmf-relay >>> rtp traffic-class local-default >>> no dtmf-mute-encoder >>> dejitter-mode static >>> >>> fax transmission 1 relay t38-udp >>> fax volume -13.5 >>> fax dejitter-max-delay 60 >>> fax detection fax-frames >>> >>> modem dejitter-max-delay 60 >>> no modem detection on-remote-fax-request >>> * >>> >>> Attached is an updated debug. It still doesn't appear to be using t.38. >>> For some reason it sitll appears to use the g711u. >>> >>> Do I need to add the additional commands you provided to the Patton T1 >>> gateway? Currently it's profile shows: >>> * >>> profile voip default >>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>> codec 2 g711alaw64k rx-length 20 tx-length 20 >>> dtmf-relay rtp >>> flash-hook-relay rtp >>> rtp traffic-class local-default >>> >>> fax transmission 1 relay t38-udp >>> fax transmission 2 bypass g711ulaw64k >>> fax detection fax-frames >>> * >>> >>> For the test, we are faxing from a fax machine on a Verizon POTS line to >>> a fax machine on the Patton FXS gateway. So the fax call goes out on a >>> POTS, comes in on the PRI T1 (Patton), then to SipX, then to the FXS >>> gateway. >>> >>> Also, how do your remove a line of configuration via that CLI? For >>> example, while in profile voip default, how would I then remove a line, for >>> example: *codec 2 g711alaw64k rx-length 20 tx-length 20 >>> >>> *Thanks, >>> >>> Jes >>> >>> >>> On 04/18/2012 05:42 PM, Becker, Jesse wrote: >>> >>> Tony, >>> Thank you. I will give that a shot. >>> >>> Jes >>> On Apr 18, 2012 4:48 PM, "Tony Graziano" <[email protected]> >>> wrote: >>> >>>> The profile is not negotiating t.38, it clearly shows g711u. >>>> >>>> profile voip default >>>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>>> codec 2 transparent-clearmode rx-length 20 tx-length 20 >>>> no dtmf-relay >>>> rtp traffic-class local-default >>>> no dtmf-mute-encoder >>>> response-preferred-codec g711ulaw64k >>>> dejitter-mode static >>>> media detection-timeout 5 >>>> fax transmission 1 relay t38-udp >>>> fax volume -13.5 >>>> fax dejitter-max-delay 60 >>>> modem dejitter-max-delay 60 >>>> no modem detection on-remote-fax-request >>>> >>>> Try that on The 4424. >>>> On Apr 18, 2012 4:23 PM, "Becker, Jesse" <[email protected]> >>>> wrote: >>>> >>>>> All, >>>>> We are experiencing intermittent issues on our fax machines connected >>>>> to a Patton SN4424. Outbound seems to work reliably, however, we have >>>>> issues with incoming calls. The call get answers, and then seems to >>>>> disconnect before the fax can finish. >>>>> >>>>> Incoming calls hit a Patton 4e1t1 device first, then SipX, then >>>>> registered UA on the Patton SN4424. >>>>> >>>>> On both devices I have configured: >>>>> fax transmission 1 relay t38-udp >>>>> fax transmission 2 bypass g711ulaw64k >>>>> fax detection fax-frames >>>>> under the profile voip default. >>>>> >>>>> Attached you will find the T1 gateway config, FXS gateway config, as >>>>> well as a call-control debug on an incoming fax that did not complete. >>>>> I have removed all passwords and replaced the caller id prefix with >>>>> NPANXX to hide full number. >>>>> >>>>> >>>>> Did I miss something in the config ? >>>>> Any assistance would be appreciated. >>>>> >>>>> Thanks, >>>>> >>>>> Jes >>>>> -- >>>>> >>>>> >>>>> Jesse Becker >>>>> >>>>> Technical Manager >>>>> Office of Information Technology >>>>> Network+ | Linux+ Certified Professional >>>>> Ellucian @ SUNY Ulster >>>>> 491 Cottekill Road, Stone Ridge, NY 12484 >>>>> Tel 845-687-5064 | Fax 845-687-5105 >>>>> [email protected] | www.sunyulster.edu >>>>> >>>>> Open or check the status of a ticket by visiting Helpdesk >>>>> Online<https://helpdesk.sunyulster.edu/> >>>>> Look up answers to frequently asked questions by visiting the Knowledge >>>>> Base <https://kb.sunyulster.edu/> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> sipx-users mailing list >>>>> [email protected] >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>> >>>> >>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>> Telephone: 434.984.8426 >>>> sip: [email protected] >>>> >>>> Helpdesk Customers: http://myhelp.myitdepartment.net >>>> Blog: http://blog.myitdepartment.net >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >>> _______________________________________________ >>> sipx-users mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> >> -- >> ~~~~~~~~~~~~~~~~~~ >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: [email protected] >> Fax: 434.465.6833 >> ~~~~~~~~~~~~~~~~~~ >> Linked-In Profile: >> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> Ask about our Internet Fax services! >> ~~~~~~~~~~~~~~~~~~ >> >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected].**net<[email protected]> >> >> Helpdesk Customers: >> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> >> Blog: http://blog.myitdepartment.net >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > > > Jesse Becker > > Technical Manager > Office of Information Technology > Network+ | Linux+ Certified Professional > Ellucian @ SUNY Ulster > 491 Cottekill Road, Stone Ridge, NY 12484 > Tel 845-687-5064 | Fax 845-687-5105 > [email protected] | www.sunyulster.edu > > <http://www.sunyulster.edu/> > > Open or check the status of a ticket by visiting Helpdesk > Online<https://helpdesk.sunyulster.edu/> > Look up answers to frequently asked questions by visiting the Knowledge > Base <https://kb.sunyulster.edu/> > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ~~~~~~~~~~~~~~~~~~ Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 ~~~~~~~~~~~~~~~~~~ Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services! ~~~~~~~~~~~~~~~~~~ -- LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
