I will send you an fxs config I use all the time offline/ On Thu, Apr 19, 2012 at 12:51 PM, Becker, Jesse <[email protected]>wrote:
> Tony, > My PRI config matches yours. I will get in touch with Patton to see if > they can help me get this resolved. > > Thanks, > > Jes > > > On Thu, Apr 19, 2012 at 12:42 PM, Tony Graziano < > [email protected]> wrote: > >> No. I thought I sent you a 4960 config some time ago. The most recent one >> I put on the wiki does work in conjunction with the 4424 profile I already >> gave you though. >> >> I'm sure if it doesnt work after comparing, patton can fix with you >> though. >> >> >> On Thu, Apr 19, 2012 at 12:38 PM, Becker, Jesse >> <[email protected]>wrote: >> >>> Tony, >>> I had guessed the no as I thought it would be similar to Cisco. The >>> issue was that you have to omit the number (ie. 2) for it to work. >>> >>> Any ideas on why it still isn't does t.38? Do I need to make the same >>> modifications you sent me for the 4424 to the SN4950 (T1 gateway) ? >>> >>> Thanks, >>> >>> Jes >>> >>> On Thu, Apr 19, 2012 at 12:19 PM, Tony Graziano < >>> [email protected]> wrote: >>> >>>> no *codec 2 g711alaw64k rx-length 20 tx-length 20* >>>> >>>> >>>> On Thu, Apr 19, 2012 at 11:27 AM, Jesse Becker >>>> <[email protected]>wrote: >>>> >>>>> Tony, >>>>> I modified my profile voip default. It didn't accept some of the >>>>> command, and the configuration is now: >>>>> * >>>>> profile voip default >>>>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>>>> codec 2 transparent-clearmode rx-length 20 tx-length 20 >>>>> no dtmf-relay >>>>> rtp traffic-class local-default >>>>> no dtmf-mute-encoder >>>>> dejitter-mode static >>>>> >>>>> fax transmission 1 relay t38-udp >>>>> fax volume -13.5 >>>>> fax dejitter-max-delay 60 >>>>> fax detection fax-frames >>>>> >>>>> modem dejitter-max-delay 60 >>>>> no modem detection on-remote-fax-request >>>>> * >>>>> >>>>> Attached is an updated debug. It still doesn't appear to be using >>>>> t.38. For some reason it sitll appears to use the g711u. >>>>> >>>>> Do I need to add the additional commands you provided to the Patton T1 >>>>> gateway? Currently it's profile shows: >>>>> * >>>>> profile voip default >>>>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>>>> codec 2 g711alaw64k rx-length 20 tx-length 20 >>>>> dtmf-relay rtp >>>>> flash-hook-relay rtp >>>>> rtp traffic-class local-default >>>>> >>>>> fax transmission 1 relay t38-udp >>>>> fax transmission 2 bypass g711ulaw64k >>>>> fax detection fax-frames >>>>> * >>>>> >>>>> For the test, we are faxing from a fax machine on a Verizon POTS line >>>>> to a fax machine on the Patton FXS gateway. So the fax call goes out on a >>>>> POTS, comes in on the PRI T1 (Patton), then to SipX, then to the FXS >>>>> gateway. >>>>> >>>>> Also, how do your remove a line of configuration via that CLI? For >>>>> example, while in profile voip default, how would I then remove a line, >>>>> for >>>>> example: *codec 2 g711alaw64k rx-length 20 tx-length 20 >>>>> >>>>> *Thanks, >>>>> >>>>> Jes >>>>> >>>>> >>>>> On 04/18/2012 05:42 PM, Becker, Jesse wrote: >>>>> >>>>> Tony, >>>>> Thank you. I will give that a shot. >>>>> >>>>> Jes >>>>> On Apr 18, 2012 4:48 PM, "Tony Graziano" <[email protected]> >>>>> wrote: >>>>> >>>>>> The profile is not negotiating t.38, it clearly shows g711u. >>>>>> >>>>>> profile voip default >>>>>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>>>>> codec 2 transparent-clearmode rx-length 20 tx-length 20 >>>>>> no dtmf-relay >>>>>> rtp traffic-class local-default >>>>>> no dtmf-mute-encoder >>>>>> response-preferred-codec g711ulaw64k >>>>>> dejitter-mode static >>>>>> media detection-timeout 5 >>>>>> fax transmission 1 relay t38-udp >>>>>> fax volume -13.5 >>>>>> fax dejitter-max-delay 60 >>>>>> modem dejitter-max-delay 60 >>>>>> no modem detection on-remote-fax-request >>>>>> >>>>>> Try that on The 4424. >>>>>> On Apr 18, 2012 4:23 PM, "Becker, Jesse" <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> All, >>>>>>> We are experiencing intermittent issues on our fax machines >>>>>>> connected to a Patton SN4424. Outbound seems to work reliably, however, >>>>>>> we >>>>>>> have issues with incoming calls. The call get answers, and then seems to >>>>>>> disconnect before the fax can finish. >>>>>>> >>>>>>> Incoming calls hit a Patton 4e1t1 device first, then SipX, then >>>>>>> registered UA on the Patton SN4424. >>>>>>> >>>>>>> On both devices I have configured: >>>>>>> fax transmission 1 relay t38-udp >>>>>>> fax transmission 2 bypass g711ulaw64k >>>>>>> fax detection fax-frames >>>>>>> under the profile voip default. >>>>>>> >>>>>>> Attached you will find the T1 gateway config, FXS gateway config, >>>>>>> as well as a call-control debug on an incoming fax that did not >>>>>>> complete. >>>>>>> I have removed all passwords and replaced the caller id prefix with >>>>>>> NPANXX to hide full number. >>>>>>> >>>>>>> >>>>>>> Did I miss something in the config ? >>>>>>> Any assistance would be appreciated. >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Jes >>>>>>> -- >>>>>>> >>>>>>> >>>>>>> Jesse Becker >>>>>>> >>>>>>> Technical Manager >>>>>>> Office of Information Technology >>>>>>> Network+ | Linux+ Certified Professional >>>>>>> Ellucian @ SUNY Ulster >>>>>>> 491 Cottekill Road, Stone Ridge, NY 12484 >>>>>>> Tel 845-687-5064 | Fax 845-687-5105 >>>>>>> [email protected] | www.sunyulster.edu >>>>>>> >>>>>>> Open or check the status of a ticket by visiting Helpdesk >>>>>>> Online<https://helpdesk.sunyulster.edu/> >>>>>>> Look up answers to frequently asked questions by visiting the Knowledge >>>>>>> Base <https://kb.sunyulster.edu/> >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> sipx-users mailing list >>>>>>> [email protected] >>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>>> >>>>>> >>>>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>>>> Telephone: 434.984.8426 >>>>>> sip: [email protected] >>>>>> >>>>>> Helpdesk Customers: http://myhelp.myitdepartment.net >>>>>> Blog: http://blog.myitdepartment.net >>>>>> >>>>>> _______________________________________________ >>>>>> sipx-users mailing list >>>>>> [email protected] >>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>> >>>>> >>>>> _______________________________________________ >>>>> sipx-users mailing list >>>>> [email protected] >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>> >>>> >>>> >>>> >>>> -- >>>> ~~~~~~~~~~~~~~~~~~ >>>> Tony Graziano, Manager >>>> Telephone: 434.984.8430 >>>> sip: [email protected] >>>> Fax: 434.465.6833 >>>> ~~~~~~~~~~~~~~~~~~ >>>> Linked-In Profile: >>>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>>> Ask about our Internet Fax services! >>>> ~~~~~~~~~~~~~~~~~~ >>>> >>>> >>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>> Telephone: 434.984.8426 >>>> sip: [email protected].**net<[email protected]> >>>> >>>> Helpdesk Customers: >>>> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> >>>> Blog: http://blog.myitdepartment.net >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >>> >>> >>> -- >>> >>> >>> Jesse Becker >>> >>> Technical Manager >>> Office of Information Technology >>> Network+ | Linux+ Certified Professional >>> Ellucian @ SUNY Ulster >>> 491 Cottekill Road, Stone Ridge, NY 12484 >>> Tel 845-687-5064 | Fax 845-687-5105 >>> [email protected] | www.sunyulster.edu >>> >>> <http://www.sunyulster.edu/> >>> >>> Open or check the status of a ticket by visiting Helpdesk >>> Online<https://helpdesk.sunyulster.edu/> >>> Look up answers to frequently asked questions by visiting the Knowledge >>> Base <https://kb.sunyulster.edu/> >>> >>> >>> >>> _______________________________________________ >>> sipx-users mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> >> -- >> ~~~~~~~~~~~~~~~~~~ >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: [email protected] >> Fax: 434.465.6833 >> ~~~~~~~~~~~~~~~~~~ >> Linked-In Profile: >> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> Ask about our Internet Fax services! >> ~~~~~~~~~~~~~~~~~~ >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected].**net<[email protected]> >> >> Helpdesk Customers: >> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> >> Blog: http://blog.myitdepartment.net >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > > > Jesse Becker > > Technical Manager > Office of Information Technology > Network+ | Linux+ Certified Professional > Ellucian @ SUNY Ulster > 491 Cottekill Road, Stone Ridge, NY 12484 > Tel 845-687-5064 | Fax 845-687-5105 > [email protected] | www.sunyulster.edu > > <http://www.sunyulster.edu/> > > Open or check the status of a ticket by visiting Helpdesk > Online<https://helpdesk.sunyulster.edu/> > Look up answers to frequently asked questions by visiting the Knowledge > Base <https://kb.sunyulster.edu/> > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ~~~~~~~~~~~~~~~~~~ Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 ~~~~~~~~~~~~~~~~~~ Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services! ~~~~~~~~~~~~~~~~~~ -- LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
