Tony, My PRI config matches yours. I will get in touch with Patton to see if they can help me get this resolved.
Thanks, Jes On Thu, Apr 19, 2012 at 12:42 PM, Tony Graziano < [email protected]> wrote: > No. I thought I sent you a 4960 config some time ago. The most recent one > I put on the wiki does work in conjunction with the 4424 profile I already > gave you though. > > I'm sure if it doesnt work after comparing, patton can fix with you though. > > > On Thu, Apr 19, 2012 at 12:38 PM, Becker, Jesse <[email protected]>wrote: > >> Tony, >> I had guessed the no as I thought it would be similar to Cisco. The >> issue was that you have to omit the number (ie. 2) for it to work. >> >> Any ideas on why it still isn't does t.38? Do I need to make the same >> modifications you sent me for the 4424 to the SN4950 (T1 gateway) ? >> >> Thanks, >> >> Jes >> >> On Thu, Apr 19, 2012 at 12:19 PM, Tony Graziano < >> [email protected]> wrote: >> >>> no *codec 2 g711alaw64k rx-length 20 tx-length 20* >>> >>> >>> On Thu, Apr 19, 2012 at 11:27 AM, Jesse Becker >>> <[email protected]>wrote: >>> >>>> Tony, >>>> I modified my profile voip default. It didn't accept some of the >>>> command, and the configuration is now: >>>> * >>>> profile voip default >>>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>>> codec 2 transparent-clearmode rx-length 20 tx-length 20 >>>> no dtmf-relay >>>> rtp traffic-class local-default >>>> no dtmf-mute-encoder >>>> dejitter-mode static >>>> >>>> fax transmission 1 relay t38-udp >>>> fax volume -13.5 >>>> fax dejitter-max-delay 60 >>>> fax detection fax-frames >>>> >>>> modem dejitter-max-delay 60 >>>> no modem detection on-remote-fax-request >>>> * >>>> >>>> Attached is an updated debug. It still doesn't appear to be using t.38. >>>> For some reason it sitll appears to use the g711u. >>>> >>>> Do I need to add the additional commands you provided to the Patton T1 >>>> gateway? Currently it's profile shows: >>>> * >>>> profile voip default >>>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>>> codec 2 g711alaw64k rx-length 20 tx-length 20 >>>> dtmf-relay rtp >>>> flash-hook-relay rtp >>>> rtp traffic-class local-default >>>> >>>> fax transmission 1 relay t38-udp >>>> fax transmission 2 bypass g711ulaw64k >>>> fax detection fax-frames >>>> * >>>> >>>> For the test, we are faxing from a fax machine on a Verizon POTS line >>>> to a fax machine on the Patton FXS gateway. So the fax call goes out on a >>>> POTS, comes in on the PRI T1 (Patton), then to SipX, then to the FXS >>>> gateway. >>>> >>>> Also, how do your remove a line of configuration via that CLI? For >>>> example, while in profile voip default, how would I then remove a line, for >>>> example: *codec 2 g711alaw64k rx-length 20 tx-length 20 >>>> >>>> *Thanks, >>>> >>>> Jes >>>> >>>> >>>> On 04/18/2012 05:42 PM, Becker, Jesse wrote: >>>> >>>> Tony, >>>> Thank you. I will give that a shot. >>>> >>>> Jes >>>> On Apr 18, 2012 4:48 PM, "Tony Graziano" <[email protected]> >>>> wrote: >>>> >>>>> The profile is not negotiating t.38, it clearly shows g711u. >>>>> >>>>> profile voip default >>>>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>>>> codec 2 transparent-clearmode rx-length 20 tx-length 20 >>>>> no dtmf-relay >>>>> rtp traffic-class local-default >>>>> no dtmf-mute-encoder >>>>> response-preferred-codec g711ulaw64k >>>>> dejitter-mode static >>>>> media detection-timeout 5 >>>>> fax transmission 1 relay t38-udp >>>>> fax volume -13.5 >>>>> fax dejitter-max-delay 60 >>>>> modem dejitter-max-delay 60 >>>>> no modem detection on-remote-fax-request >>>>> >>>>> Try that on The 4424. >>>>> On Apr 18, 2012 4:23 PM, "Becker, Jesse" <[email protected]> >>>>> wrote: >>>>> >>>>>> All, >>>>>> We are experiencing intermittent issues on our fax machines >>>>>> connected to a Patton SN4424. Outbound seems to work reliably, however, >>>>>> we >>>>>> have issues with incoming calls. The call get answers, and then seems to >>>>>> disconnect before the fax can finish. >>>>>> >>>>>> Incoming calls hit a Patton 4e1t1 device first, then SipX, then >>>>>> registered UA on the Patton SN4424. >>>>>> >>>>>> On both devices I have configured: >>>>>> fax transmission 1 relay t38-udp >>>>>> fax transmission 2 bypass g711ulaw64k >>>>>> fax detection fax-frames >>>>>> under the profile voip default. >>>>>> >>>>>> Attached you will find the T1 gateway config, FXS gateway config, >>>>>> as well as a call-control debug on an incoming fax that did not complete. >>>>>> I have removed all passwords and replaced the caller id prefix with >>>>>> NPANXX to hide full number. >>>>>> >>>>>> >>>>>> Did I miss something in the config ? >>>>>> Any assistance would be appreciated. >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Jes >>>>>> -- >>>>>> >>>>>> >>>>>> Jesse Becker >>>>>> >>>>>> Technical Manager >>>>>> Office of Information Technology >>>>>> Network+ | Linux+ Certified Professional >>>>>> Ellucian @ SUNY Ulster >>>>>> 491 Cottekill Road, Stone Ridge, NY 12484 >>>>>> Tel 845-687-5064 | Fax 845-687-5105 >>>>>> [email protected] | www.sunyulster.edu >>>>>> >>>>>> Open or check the status of a ticket by visiting Helpdesk >>>>>> Online<https://helpdesk.sunyulster.edu/> >>>>>> Look up answers to frequently asked questions by visiting the Knowledge >>>>>> Base <https://kb.sunyulster.edu/> >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> sipx-users mailing list >>>>>> [email protected] >>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>> >>>>> >>>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>>> Telephone: 434.984.8426 >>>>> sip: [email protected] >>>>> >>>>> Helpdesk Customers: http://myhelp.myitdepartment.net >>>>> Blog: http://blog.myitdepartment.net >>>>> >>>>> _______________________________________________ >>>>> sipx-users mailing list >>>>> [email protected] >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>> >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >>> >>> >>> -- >>> ~~~~~~~~~~~~~~~~~~ >>> Tony Graziano, Manager >>> Telephone: 434.984.8430 >>> sip: [email protected] >>> Fax: 434.465.6833 >>> ~~~~~~~~~~~~~~~~~~ >>> Linked-In Profile: >>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>> Ask about our Internet Fax services! >>> ~~~~~~~~~~~~~~~~~~ >>> >>> >>> LAN/Telephony/Security and Control Systems Helpdesk: >>> Telephone: 434.984.8426 >>> sip: [email protected].**net<[email protected]> >>> >>> Helpdesk Customers: >>> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> >>> Blog: http://blog.myitdepartment.net >>> >>> _______________________________________________ >>> sipx-users mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> >> -- >> >> >> Jesse Becker >> >> Technical Manager >> Office of Information Technology >> Network+ | Linux+ Certified Professional >> Ellucian @ SUNY Ulster >> 491 Cottekill Road, Stone Ridge, NY 12484 >> Tel 845-687-5064 | Fax 845-687-5105 >> [email protected] | www.sunyulster.edu >> >> <http://www.sunyulster.edu/> >> >> Open or check the status of a ticket by visiting Helpdesk >> Online<https://helpdesk.sunyulster.edu/> >> Look up answers to frequently asked questions by visiting the Knowledge >> Base <https://kb.sunyulster.edu/> >> >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > ~~~~~~~~~~~~~~~~~~ > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected].**net<[email protected]> > > Helpdesk Customers: > http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> > Blog: http://blog.myitdepartment.net > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Jesse Becker Technical Manager Office of Information Technology Network+ | Linux+ Certified Professional Ellucian @ SUNY Ulster 491 Cottekill Road, Stone Ridge, NY 12484 Tel 845-687-5064 | Fax 845-687-5105 [email protected] | www.sunyulster.edu <http://www.sunyulster.edu/> Open or check the status of a ticket by visiting Helpdesk Online<https://helpdesk.sunyulster.edu/> Look up answers to frequently asked questions by visiting the Knowledge Base<https://kb.sunyulster.edu/>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
