On Thu, 10 May 2012 14:08:19 -0400, Tony Graziano wrote: > You never explained your call flow. If the call originates from the > ITSP, they set this value. They should not be sending a value that > low.
I guess based on my earlier posting, I figured the call flow was obvious but it's as follows. SIP trunk from appia registered as gateway on sipx User created with DID from appia using this trunk. SIP phone registered to sipx using this user account. SIP phone can make outgoing calls no problem. Using cell phone to call above DID leads to VM if left to ring but ends if call is picked up. > Sipx uses a sip friendly value of around 69 i think, which is the RFC > recommendation (as I recall). > > On Thu, May 10, 2012 at 1:55 PM, [email protected] <[email protected]> > wrote: >> On Thu, 10 May 2012 13:30:10 -0400, Tony Graziano wrote: >>> Why does the call come in with only 13 forwards? It's running out. See >>> frame 11. It should have 60'ish (69) as a default. Either way 13 is >>> way to low. >>> >> Yes, I see that in the trace; Max-Forwards: 13 >> >> I don't see this as a setting in the gateway, is this something I can >> change? And even if so, why would it need to be changed when sipx works >> fine >> with the other ITSP's? Does that point to verizon needing to change >> something or appia? >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > ~~~~~~~~~~~~~~~~~~ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
