Rémi Marand, In your pcap SipX is not getting to the point where it will accept and process the Invite from circpack. SipX responds with a 407 and circpack ACKs but can't send SipX what it wants to get by the 407. This problem is similar to a Site A to Site B call with a far end drop off at Site B via dialplan.
If 0183820223 is matched to a "dialed number" in a dial plan which routes the call to the IVR gateway - you might look at that dial plan's permissions. The Invite coming from circpack does not carry permission rights. If the dial plan that acts on the incoming User-ID has a permission activated, SipX will respond with a 407 and circpack Invites will not be able to get past this. Set the dial plan that matches 0183820223 to have *no* permissions checked, that should get you past the 407 auth problem. Of course operating a dial plan without any permissions set means you need to analyze [specific to your environment] if you opened a security vulnerability. With no permissions on the dial plan SipX will process any Invites it receives without regard to where it came from. Though if SipX is on a trusted LAN and the dial plan in question matches a limited group of numbers and only sends to an IVR - Security is not likely a problem. don -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Marand Remi Sent: Friday, May 18, 2012 10:01 AM To: [email protected] Subject: Re: [sipx-users] Routing calls between 2 gateways or sip trunk. The Cirpack is a trunk SIP for the SIPX, there is no authentication neither in the Cirpack nor in the SIPX. About the possibility to use a Unmanaged Gateway instead i would be glad to talk about that in another discussion. On the Cirpack - SipX port, i use the 5080 port to SipX (local SBC) and 5070 to the Cirpack, this peer is OK to handle incoming and outgoing calls between registered users and outside. The Outgoing call to the Cirpack (long distance numplan) does not need authentication, this outgoing call from registered users are OK. I Use the DID number 01838290223 in a dial plan, to try to route the call to the IVR, now this DialPlan is a Site to Site plan, with the svi.prosodie destination and the pros8o.svi.prosodie gateway, but i tried the same thing with a custom plan with the same result (407 to the Cirpack). Thanks for help. Rémi Marand. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ "The information in this electronic mail message is the sender's confidential business and may be legally privileged. It is intended solely for the addressee(s). Access to this internet electronic mail message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful." "The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments." "In connection with representing sellers and/or buyers in real estate transactions, Coldwell Banker Residential Brokerage real estate sales associates have absolutely no authority to create binding contractual obligations on behalf of a seller or on behalf of a buyer via any written or verbal communications including, but not limited to email communications." [v1.0.07.109] _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
