Nobody is reading the diagram, so i copy what is wrote inside :
The SipX is pros0x.sip.prosodie, address : 10.3.3.110. Cirpack Switch is "ITSP" boul0c.sip.prosodie : 10.3.3.10 The peer between boul0C and pros0x is a "Trunk SIP" mode, I have not be able to use "Unamanaged gateway", because the REFER message from SipX (for transferring call) is not understood by Cirpack. The registered users on pros0x.sip.prosodie are receiving their calls from boul0c, SDA number are 0183820220, 0221, 0222, etc. The IVR "pros8s.svi.prosodie" ip address is 10.41.24.158, this machine is receiving calls from Sipx users. The IVR peer is a "Unmanaged Gateway". I am using a Site to Site dial plan to send the external SDA 0183820223 to the IVR. This routage is ok if I use it in a sipx local way (dialing it from a registered user, or using it as a forwarded number. The external call from the cirpack to the IVR is broken (407 proxy authentication required). I know it is possible to use AA, Hunting group or Call forward from registered users, but i can not do that because the number of SDA concerned by this case is huge... The question is very simple : is it possible to route calls from a gateway to another one (or Trunk SIP)with sipX, and if yes, what is your config advice ??? Regards. Rémi Marand. mailto:[email protected] _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
