did not add quotes -- and the URL at the end still has them:
[root@sipx ~]# sipxecs-setup --reset-all This will wipe all configuration data from this server. Are you sure? [ enter 'y' or 'n' ] : y Network settings: IP address : 192.168.X.26 Would you like to configure your system's network settings? [ enter 'y' or 'n' ] : n Enter just the host name of this computer?. Example: myhost. [ press enter for '"sipx' ] : Enter just the domain name of your network? Example: mydomain.com [ press enter for 'domain.com"' ] : Is this the first server in your cluster? [ enter 'y' or 'n' ] : y Configuring as the first server... Tip: Use '"sipx.domain.com"' as your SIP domain if you are setting up for the first time or if you know you are only going to setup one server. This can make configuration easier. You can always change the value later. Enter SIP domain name [ press enter for 'domain.com"' ] : sipx.domain.com Enter SIP realm [ press enter for 'sipx.domain.com' ] : Initial setup, this may take a few minutes... Finishing system configuration, almost done... done. In a few more minutes you will be able to access the administration interface from your web browser at the following URL: https://"sipx.domain.com"; On Jul 30, 2012, at 12:43 , Douglas Hubler wrote: > Somehow you might have double quotes around your host name. When > running sipxecs-setup, did you put double quotes around your host > name? _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
