Just tried a couple variants of that - first one left the host and domain at default and then I manually typed everything else -- that produced the same result at the end:
https://"sipx.domain.com"; Note spurious double quotes show in the proposed defaults: Enter just the host name of this computer?. Example: myhost. [ press enter for '"sipx' ] : Enter just the domain name of your network? Example: mydomain.com [ press enter for 'domain.com"' ] : Re- running but manually entering those produced the expected: https://sipx.murray-hotel.com at the end. thanks~ On Jul 30, 2012, at 13:01 , Tony Graziano wrote: > perhaps re-run the script and manually input the host and sipdomain (instead > of hitting enter) to see if it removes the quotes. > > On Mon, Jul 30, 2012 at 2:59 PM, Kurt Albershardt <[email protected]> wrote: > did not add quotes -- and the URL at the end still has them: > > > [root@sipx ~]# sipxecs-setup --reset-all > This will wipe all configuration data from this server. Are you sure? [ enter > 'y' or 'n' ] : y > Network settings: > IP address : 192.168.X.26 > Would you like to configure your system's network settings? [ enter 'y' or > 'n' ] : n > Enter just the host name of this computer?. Example: myhost. [ press enter > for '"sipx' ] : > Enter just the domain name of your network? Example: mydomain.com [ press > enter for 'domain.com"' ] : > Is this the first server in your cluster? [ enter 'y' or 'n' ] : y > Configuring as the first server... > Tip: Use '"sipx.domain.com"' as your SIP domain if you are > setting up for the first time or if you know you are only going to setup one > server. This can make configuration easier. You can always change the value > later. > Enter SIP domain name [ press enter for 'domain.com"' ] : sipx.domain.com > Enter SIP realm [ press enter for 'sipx.domain.com' ] : > Initial setup, this may take a few minutes... > Finishing system configuration, almost done... > done. > > > In a few more minutes you will be able to access the administration > interface from your web browser at the following URL: > > https://"sipx.domain.com"; > > > > > > > On Jul 30, 2012, at 12:43 , Douglas Hubler wrote: > > > Somehow you might have double quotes around your host name. When > > running sipxecs-setup, did you put double quotes around your host > > name? > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > ~~~~~~~~~~~~~~~~~~ > > Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab 2013! > > > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Customers: http://myhelp.myitdepartment.net > Blog: http://blog.myitdepartment.net > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
