Happened the first time I ran the script, FWIW. Install was updated 2-3x before I ran setup (due to dependency glitches) so it's not a good test case. I'll re-install on a clean VM and try again.
On Jul 30, 2012, at 13:26 , Tony Graziano wrote: > i might venture a guess that re-running the script and taking the defaults > are doing this. if so, it would be incorrect and unwanted behavior. i think > in order to open a jira, it needs to be tried against a fresh install and all > patched up prior to running, then re-running the script. if it continues to > happen a jira would be in order. > > On Mon, Jul 30, 2012 at 3:11 PM, Kurt Albershardt <[email protected]> wrote: > Just tried a couple variants of that - first one left the host and domain at > default and then I manually typed everything else -- that produced the same > result at the end: > > https://"sipx.domain.com"; > > > Note spurious double quotes show in the proposed defaults: > > Enter just the host name of this computer?. Example: myhost. [ press enter > for '"sipx' ] : > Enter just the domain name of your network? Example: mydomain.com [ press > enter for 'domain.com"' ] : > > Re- running but manually entering those produced the expected: > > https://sipx.murray-hotel.com > > at the end. > > > > thanks~ > > > > > On Jul 30, 2012, at 13:01 , Tony Graziano wrote: > >> perhaps re-run the script and manually input the host and sipdomain (instead >> of hitting enter) to see if it removes the quotes. >> >> On Mon, Jul 30, 2012 at 2:59 PM, Kurt Albershardt <[email protected]> wrote: >> did not add quotes -- and the URL at the end still has them: >> >> >> [root@sipx ~]# sipxecs-setup --reset-all >> This will wipe all configuration data from this server. Are you sure? [ >> enter 'y' or 'n' ] : y >> Network settings: >> IP address : 192.168.X.26 >> Would you like to configure your system's network settings? [ enter 'y' or >> 'n' ] : n >> Enter just the host name of this computer?. Example: myhost. [ press enter >> for '"sipx' ] : >> Enter just the domain name of your network? Example: mydomain.com [ press >> enter for 'domain.com"' ] : >> Is this the first server in your cluster? [ enter 'y' or 'n' ] : y >> Configuring as the first server... >> Tip: Use '"sipx.domain.com"' as your SIP domain if you are >> setting up for the first time or if you know you are only going to setup one >> server. This can make configuration easier. You can always change the value >> later. >> Enter SIP domain name [ press enter for 'domain.com"' ] : sipx.domain.com >> Enter SIP realm [ press enter for 'sipx.domain.com' ] : >> Initial setup, this may take a few minutes... >> Finishing system configuration, almost done... >> done. >> >> >> In a few more minutes you will be able to access the administration >> interface from your web browser at the following URL: >> >> https://"sipx.domain.com"; >> >> >> >> >> >> >> On Jul 30, 2012, at 12:43 , Douglas Hubler wrote: >> >> > Somehow you might have double quotes around your host name. When >> > running sipxecs-setup, did you put double quotes around your host >> > name? >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >> >> >> -- >> ~~~~~~~~~~~~~~~~~~ >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: [email protected] >> Fax: 434.465.6833 >> ~~~~~~~~~~~~~~~~~~ >> Linked-In Profile: >> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> Ask about our Internet Fax services! >> ~~~~~~~~~~~~~~~~~~ >> >> Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab >> 2013! >> >> >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected] >> >> Helpdesk Customers: http://myhelp.myitdepartment.net >> Blog: http://blog.myitdepartment.net >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > ~~~~~~~~~~~~~~~~~~ > > Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab 2013! > > > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Customers: http://myhelp.myitdepartment.net > Blog: http://blog.myitdepartment.net > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
