Hi,
Specific Intelliscope information is at the bottom of the help page (the
question mark button at the bottom of the encoder window)
I copy this information given by Gary here:
1. Set up Port Configuration
9600,8,N,1
Timeout 1000 mS
Interval Timeout 1000mS
2. Set up encoder configuration
Type Intelliscope
Steps for Alpha 9216
Steps for Delta 9216
Read Interval 1000 ( other values may work too )
Mount Type Alt-Az
Encoder Init Angle 90
3. Turn on Intelliscope, and press enter atleast once.
( Note 1 : you can go through the alignment proceedure for the
Intelliscope or not, the Cdc alignment is independent of the Intelliscope)
Note 2: You must press a key on the Intelliscope once in every 15 mins
or it will goto sleep, and you will have to reallign! )
4. Press connect and follow the nomal Cdc vertical and two star alignment.
Patrick
------------------------ Yahoo! Groups Sponsor --------------------~-->
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/1.XolB/TM
--------------------------------------------------------------------~->
To Post a message, send it to: [email protected]
To Unsubscribe, send a blank message to:
[EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/skychart-discussion/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
