Brett Fenton wrote:
> your problem is not related to resolv.conf if you can't ping IP
> addresses outside of your network as these don't require mapping via
> nameservers/DNS.
>
> you need a gateway line in the config for the box presumably that
> handles your NAT etc quite typically this will be *.*.*.1 but it's
> hardly a convention
Have got it working now. I have done a:
route add default gw A-gateway eth0
Now apt-get update works and its seeing packages ok.
Next step will be to get this netenv working so I get a dialog box up at
boot time to select my networking environment.
Its installed but is not being started upon boot. I have found its home
page at netenv.sourceforge and will look at that.
Thanks all :-)
--
Mike Lake
Uni of Technol., Sydney
UTS CRICOS Provider Code: 00099F
DISCLAIMER
========================================================================
This email message and any accompanying attachments may contain
confidential information. If you are not the intended recipient, do not
read, use, disseminate, distribute or copy this message or attachments.
If you have received this message in error, please notify the sender
immediately and delete this message. Any views expressed in this message
are those of the individual sender, except where the sender expressly,
and with authority, states them to be the views the University of
Technology Sydney. Before opening any attachments, please check them for
viruses and defects.
========================================================================
--
SLUG - Sydney Linux User's Group - http://slug.org.au/
More Info: http://lists.slug.org.au/listinfo/slug
