RE: [smartBridges] Reset

[Todd Barber]

Seeni,               We currently have a number of APPO in service.  Before upgrading to the latest software and firmware we were able to place the units into both client bridge and wireless bridge mode.               With the latest firmware I can place the units into the above modes but I am unable to log into them with the administrator password.  If I leave the password at the default of public then simpleMonitor complains that I am trying to log into the unit with the user password.  I am able to log into the units as user but then I am unable to set any of the advanced features or even perform a site survey.               I know I must be missing something simple but I am unable to resolve this issue.  Please let me know what I am doing wrong.  Thanks in advance for any help.   Todd Barber Skylink Broadband Internet [EMAIL PROTECTED] 970-346-1834   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Seeni Sent: Sunday, June 01, 2003 9:07 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Reset   Roger,   Configuration stored by simple deploy, when you reset it will go to the stored configuration only. The only way to do is that to maintain 2 different aB.cfg files in the simple deploy and 1 file with smartBridges default settings.  Without simple deploy, there is no way to set factory default.   Seeni   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roger Howard Sent: Monday, June 02, 2003 1:23 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] Reset   After using simple deploy, the re-set button re-sets the airbridge to your own configuration. Is there any way after doing this to re-set the airbridge to the factory settings?   Thanks, Roger   The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6