Hi
Todd,
The latest firmware means, Are you using the firmware version 1.4j.5?. This
firmware works well with client bridge and wireless bridge mode.
Please try to upgrade the firmware one more time by manually and see the
results (programs files/smartBridges/airPoinPRO/fw grade).
The above option does not help, please reset (hard reset) the unit to the
factory default settings and upgrade the firmware again.
User login rights do not have the permission to set any advanced features and
only can be done with administrator rights.
Regards,
Seeni
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Todd
Barber
Sent: Monday, June 02,
2003 11:30 AM
To:
'[EMAIL PROTECTED]'
Subject: RE: [smartBridges]
Reset
Seeni,
We currently have a number of APPO in service. Before upgrading to the
latest software and firmware we were able to place the units into both client
bridge and wireless bridge mode.
With the latest firmware I can place the units into the above modes but I am
unable to log into them with the administrator password. If I leave the
password at the default of public then simpleMonitor complains that I am
trying to log into the unit with the user password. I am able to log
into the units as user but then I am unable to set any of the advanced
features or even perform a site survey.
I know I must be missing something simple but I am unable to resolve this
issue. Please let me know what I am doing wrong. Thanks in advance
for any help.
Todd
Barber
Skylink Broadband
Internet
[EMAIL PROTECTED]
970-346-1834
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Seeni
Sent: Sunday, June 01, 2003 9:07
PM
To:
[EMAIL PROTECTED]
Subject: RE: [smartBridges]
Reset
Roger,
Configuration stored by simple
deploy, when you reset it will go to the stored configuration only. The only
way to do is that to maintain 2 different aB.cfg files in the simple deploy
and 1 file with smartBridges default settings. Without simple deploy,
there is no way to set factory default.
Seeni
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Roger Howard
Sent: Monday, June 02, 2003 1:23 AM
To:
'[EMAIL PROTECTED]'
Subject: [smartBridges] Reset
After using simple deploy, the re-set
button re-sets the airbridge to your
own configuration. Is there any way after
doing this to re-set the airbridge
to the factory
settings?
Thanks,
Roger
The PART-15.ORG smartBridges Discussion
List
To Join: mailto:[EMAIL PROTECTED] (in
the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED]
(in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6
