Yes cpe's usually have a setting for preamble and I do remember a thread awhile back saying that it could improve performance, but to change it for all the cpe's if you change on the ap.
---------- Original Message ---------------------------------- From: Sam <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Mon, 9 Jun 2003 15:10:15 -0500 (CDT) >> Please don't take offense to this, as I feel your pain in other areas >> that have cost some dollars. > >No offense taken at all. :) > >> I don't think in the past that smartbridges recommended changing the >> preamble to short from long, unless of course you changed all of the cpe >> units. > >I was told by the company that I hired to do "second-level" support for me >that Smartbridges had instructed them to set the preamble to "short". >(Alex, do you have any thoughts on how it should be set?) > >> Now I could be wrong, but I'm pretty sure if you change the AP you have >> to change the cpe's to use the same preamble as well. > >Do the CPE (Airbridges) have a setting for preamble? I don't recall seeing >that. > >Thanks >Sam > > >The PART-15.ORG smartBridges Discussion List >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges ><yournickname> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) >Archives: http://198.63.203.6 >--- >[This E-mail scanned for viruses by Declude Virus By Avolve.net] > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
