Shawn Mitchell,

It is old_bugs firmware.

If " warm restart ",
AP expects the ANY_packets_interrupts from a Aether,
if the packets are that there are no problems :)

If " cold restart " (off/on power) no problems.



-Ivan

-----Original Message-----
From: "Shawn Mitchell" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Date: Tue, 17 Jun 2003 01:08:52 -0500
Subject: [smartBridges] Wireless port problems...

> 
> Ok...  Here's a big problem that's starting to just p*** me off...
> 
> airPoint Pro (indoor)
> 
> Unit 1:  Will not do any RF Output when in repeater mode...  If I set it to
> AP mode, and reset it (holding in the reset button) and clicking the factory
> default's button... and spend 10 min or so doing this the unit will start
> sending RF packets...
> 
> Now, the counters show that it's getting rf packets, but not a single tx
> packet... not even beacon's...
> 
> Now, Unit 2:
> 
> Same problems as Unit one, except with a twist... On the Tx packets for the
> RF interface, I see one broadcast... never anymore than that... and the
> Ethernet interface keeps resetting about every 2 min...   This one is just
> going to be a normal AP...
> 
> 
> Has anyone ever seen anything like this before?  On Unit 1 I'm trying to
> Associate it to an AP.  I can see many AP's, but any of them I double click
> on it just counts down to 0 seconds and gives me the failed message.  If I
> put the info (ESSID, BSSID, etc) in manually, as soon as I hit the Set
> Values button, it pop's up an error telling me it can't set it...
> 
> 
> Any idea's?  Or do I have to RMA these units?  I already have a handful of
> other ap's that I am having to rma...
> 
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
> <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
> Archives: http://198.63.203.6  

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6  

Reply via email to