Re: [smartBridges] Having throughput issues with APPO

[Ray]

Title: Message

I have swapped the switch out for an old hub (10M only) and used a cross over cable but still have the same problem.  There are no LOS issues.     ----- Original Message ----- From: Tom Haynes To: [EMAIL PROTECTED] Sent: Tuesday, July 01, 2003 11:06 PM Subject: RE: [smartBridges] Having throughput issues with APPO Are you relying on the switches auto-crossover function (if it has it). Make sure that all radios have Basic Rates set to All or 11Mb with Auto Fall Back enabled. If you are too close to the make sure the link can support 11Mb. If you are too close or too far or poor LOS you will only get lower speeds. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ray Sent: Tuesday, July 01, 2003 2:35 PM To: [EMAIL PROTECTED] Subject: [smartBridges] Having throughput issues with APPO Our wiPoP is having throughput issues.  We have it plugged into a switch that has our backhaul APPO plugged in.  We can plug a laptop into the switch and pull 4 megs all day.  But when we associate with the wiPoP we can only get 1 meg (total).   We have 150 feet of cat 5 and we're using an 18v power supply.  RSSI and LQ is 100%.  I can start a download (internal) and get 1-meg and on a second client (different ABO) start a download and both drop to 500k.   Does anyone have any ideas regarding this?