|
Sully,
I get this too if I am more than a couple of hops away from unit.(such as 1 or 2 repeaters in the line.)
Earl UpHi.net
-------Original Message-------
Date: Thursday, July 24, 2003 01:05:06 PM
Subject: RE: [smartBridges] Cant log into units??
Wow...this has me really stumped.
If I get the client to do a "restore to factory default", then I can log
right in.
If I wirelessly use simpleDeploy on the airPoints (airBridges down allow
this), then I can log right into the units.
Otherwise, I can not log in. I get this error message "Can not Read the
airBridge Configuration...Check your password."
Please...does anyone have a clue on what could be causing this??
Sully
-----Original Message-----
Network
Sent: Saturday, July 19, 2003 11:20 PM
Subject: RE: [smartBridges] Cant log into units??
BTW...I did not upgrade any of these units to the new BETA firmware.
So...it's not that either.
As a matter of fact, I haven't done anything to these units. I bet that
a manual "restore to factory default" by the client would allow me to
log in again. But....being that the units are working still, I really
don't want to bother the client.
Sully
-----Original Message-----
Network
Sent: Saturday, July 19, 2003 11:11 PM
Subject: RE: [smartBridges] Cant log into units??
MORE INFO:
Rebooting the devices with simpleNMS does NOT work. I still can not log
into 75% of my units (aP, aPPo, aB, aBO).
I used simpleDeploy to reflash the "bad" aPPo-CB units (aPPo's and aP's
are the only ones I can still wirelessly use simpeDeploy on). Once I
reflashed them with simpleDeploy, I was able to log in as normal with
simpleMonitor.
1. simpleDeploy uses the ADMIN password. So...obviously, I know my
passwords. So...please don't suggest bad password.
2. I have simpleNMS loaded with my ADMIN passwords as well, and I am
able to see stats and perform reboots. Once again proving that I know
all my passwords.
3. MRTG is polling the units every 5 minutes with the USER passwords.
One last time proving that I know my passwords.
So....why am I all of a sudden unable to log into 75% of my units (very
old and very new units)?!?!?!
Why does reflashing them with simpleDeploy fix the problem???
About 30 of my units are aB or aBo's, so I cant use simpleDeploy to fix
the problem.
Anyone have any suggestions???
Sully
-----Original Message-----
Network
Sent: Saturday, July 19, 2003 9:58 PM
Subject: [smartBridges] Cant log into units??
For some odd reason, I can not log into a lot of my units using
simpleMonitor. I have tried both the admin and user passwords as well.
To add to the oddness, simpleNMS is able to talk with all the units
(obtaining their stats, etc). But when I choose MANAGE (which opens
simpleMonitor--also using my ADMIN password), I get the "Can not
read...check your password" crap.
Same thing happens when I try to open it with simpleMonitor directly.
More oddness....MRTG is polling the units just fine, obtaining their
usage, RSSI and LQ...using the USER password.
I am stumped. I don't know when this started...cause I don't normally
log into the units unless there is a problem. I had one that wouldn't
let me in today, so I tried all of them.
To recap...I can not log into over half of my units (about 35 of the 45)
using either the ADMIN or USER password
What the heck I am doing wrong....duh....am I forgetting something
really stupid???
Sully
The PART-15.ORG smartBridges Discussion List
smartBridges <yournickname>
smartBridges)
The PART-15.ORG smartBridges Discussion List
smartBridges <yournickname>
smartBridges)
The PART-15.ORG smartBridges Discussion List
smartBridges <yournickname>
smartBridges)
The PART-15.ORG smartBridges Discussion List
. | 
IncrediMail - Email has finally evolved - Click Here