Just noticing in the site survey pane, Seems like a lot of crowding in there. Seems almost all the channels have an ap siting on it. That can't help George
----- Original Message ----- From: "dennys" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 30, 2003 7:47 PM Subject: [smartBridges] up down link quality with appo troubleshooting question > our Wireless (in site 1) > Antenna : Klinkert Unidirectional 24 dBi > Type : APPO > Firmware : 1.4j.8 > APPO Power : 17.5 dBm > Cable Lost : 2 dBm > ESSID : JAM-SHD > Operational Mode : Client Bridge > IP : 10.99.88.1 > Regulatory : MKK1 > Channel : 4 --> the best ping we get if we use this channel different than Parent > RTS/CTS : 2437 > Preamble : Short > Other Setting : default > > our Wireless (in site 2) > Antenna : Klinkert Unidirectional 24 dBi > Type : APPO > Firmware : 1.4j.8 > APPO Power : 17.5 dBm > Cable Lost : 2 dBm > ESSID : JAM-SHD > Operational Mode : Access Point > IP : 10.99.88.2 > Regulatory : MKK1 > Channel : 14 > RTS/CTS : 2437 > Preamble : Short > Other Setting : default > > Distance between 2 our wireless +/- 3 Km > Another wireless detected by our Site 1 +/- 8 Wireless > > Question : > 1. why our link quality up down and not stable ? > 2. how can we make it more stable ? > 3. is our wireless link quality interference with other wireless ? > 4. why our wireless in site 1 (client bridge mode) detect another > good link quality from neighbour wireless except that parent > wireless in site 2 ? > 5. is link quality up down as shown in graphic will stable if we > use amplifier ? > 6. if we must add amplifier, can we just at it in our parent wireless > in site 2 ? > > thank's for your help, because we want to make it more stable and we > are very very very interest to use your smartBridges product for all > our WISP enviroment... (middle cheap, good range, and bad up down link > quality,plese help us to fix it) > > regards > dennys > ------- End of Forwarded Message ------- > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
