Hi Denny, Please change the preamble settings to "Long" and most of the time "Long" preamble settings will improve the stability in the long distance wireless network. Please see the answers for your questions in my support email.
Thank you. Seeni, SB support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of dennys Sent: Thursday, July 31, 2003 10:47 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] up down link quality with appo troubleshooting question our Wireless (in site 1) Antenna : Klinkert Unidirectional 24 dBi Type : APPO Firmware : 1.4j.8 APPO Power : 17.5 dBm Cable Lost : 2 dBm ESSID : JAM-SHD Operational Mode : Client Bridge IP : 10.99.88.1 Regulatory : MKK1 Channel : 4 --> the best ping we get if we use this channel different than Parent RTS/CTS : 2437 Preamble : Short Other Setting : default our Wireless (in site 2) Antenna : Klinkert Unidirectional 24 dBi Type : APPO Firmware : 1.4j.8 APPO Power : 17.5 dBm Cable Lost : 2 dBm ESSID : JAM-SHD Operational Mode : Access Point IP : 10.99.88.2 Regulatory : MKK1 Channel : 14 RTS/CTS : 2437 Preamble : Short Other Setting : default Distance between 2 our wireless +/- 3 Km Another wireless detected by our Site 1 +/- 8 Wireless Question : 1. why our link quality up down and not stable ? 2. how can we make it more stable ? 3. is our wireless link quality interference with other wireless ? 4. why our wireless in site 1 (client bridge mode) detect another good link quality from neighbour wireless except that parent wireless in site 2 ? 5. is link quality up down as shown in graphic will stable if we use amplifier ? 6. if we must add amplifier, can we just at it in our parent wireless in site 2 ? thank's for your help, because we want to make it more stable and we are very very very interest to use your smartBridges product for all our WISP enviroment... (middle cheap, good range, and bad up down link quality,plese help us to fix it) regards dennys ------- End of Forwarded Message ------- The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
