Also, remember that you need to check the signal from both ends of the link.


----- Original Message ----- 
From: "Marlon Schafer (509-982-2181)" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, August 02, 2003 9:29 AM
Subject: Re: [smartBridges] Connecting with low signal


> You need more than 40% to make a link work.
>
> marlon
>
> ----- Original Message ----- 
> From: "Jeremy Oswalt" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, August 01, 2003 7:37 PM
> Subject: [smartBridges] Connecting with low signal
>
>
> > We installed a customer today using an ABO.  The RSSI was between 29%
and
> 40% with the signal strength floating between 50% and 67%.  After spending
> hours putting up the guyed mast and running the wire, we tested the
> connection and can't get it to ping anything.  We checked the MAC
> authentication table and it is entered.  We reentered the WEP key and the
> administrator password.  It associates, but we can't ping or get to
anything
> on my network or the Internet.  I'm using the latest firmware 1.07.
> >
> > I checked on the Access point and it sees it associated, but the signal
> properties are 0 and it shows it trasmitting data.  If you look at the
> statistics on the ABO when you ping, it shows the failed packets, but the
> receive and transmit statistics are showing no errors.  What am I missing?
> This is about our 20th customer using Airbridges, so we've done this
before.
> Any ideas?
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.502 / Virus Database: 300 - Release Date: 7/21/2003

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to