I have several people working with less than 40%. Some with less than 20%. But they are only moving 256k.
Sam On Sat, 2 Aug 2003, Marlon Schafer (509-982-2181) wrote: > You need more than 40% to make a link work. > > marlon > > ----- Original Message ----- > From: "Jeremy Oswalt" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, August 01, 2003 7:37 PM > Subject: [smartBridges] Connecting with low signal > > > > We installed a customer today using an ABO. The RSSI was between 29% and > 40% with the signal strength floating between 50% and 67%. After spending > hours putting up the guyed mast and running the wire, we tested the > connection and can't get it to ping anything. We checked the MAC > authentication table and it is entered. We reentered the WEP key and the > administrator password. It associates, but we can't ping or get to anything > on my network or the Internet. I'm using the latest firmware 1.07. > > > > I checked on the Access point and it sees it associated, but the signal > properties are 0 and it shows it trasmitting data. If you look at the > statistics on the ABO when you ping, it shows the failed packets, but the > receive and transmit statistics are showing no errors. What am I missing? > This is about our 20th customer using Airbridges, so we've done this before. > Any ideas? > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
