That's why I am in favor of a surge protector at each end of the run....such
as the new polyphaser unit, or the multiple unit made by Transtector:
http://www.transtector.com/proxim/index.html
----- Original Message -----
From: "Mike Brownson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, August 10, 2003 7:33 PM
Subject: RE: [smartBridges] AP Indoor
> Years ago I used to do some lightning protection consulting and seminars
> for protecting Radio sites. One common misconception is that a shielded
> cable will keep the surge energy off the conductors inside. WRONG! Years
> ago the folks at PolyPhaser did some testing by applying a 10,000 amp
> surge to the shield of a cable. they measured what was at the end and
> found that half of the surge energy was transfered to the inner
> conductors. The small wonder of capacitance that transfers energy between
> parallel plates (or wires in this case). Still need an ethernet protector
> at the ground, shielded or not.
>
> Mike B
>
>
> > Chris
> > Just as important
> > We have been waiting on word hopeing they would rework the case of all
> > the radios
> > We don't have that many radios in the field testing
> > We lost one on a 50' tower, the lightning came in on the 50' piece of
> > non shielded cat 5 that was attached to the radio
> > We have two radios we have had to reset after a storm, suspect static
> > voltages in the air, no shielding
> >
> > They could easiely do away with the 6" piece of non shielded cat 5
> > hanging down from the radio and put the
> > jack inside the radio with a screw in umg that tightens up on the cat 5,
> > they could spray the
> > cases with metalic paint
> >
> > I don't know how much it would take, not much I would think, they need
> > to increase the power to at least 100mw
> > I was told not to use amps, so far we haven't, but sometimes I think we
> > need to
> >
> >>From the best we could tell, we had one aBO disassociating, but the new
> > software fixed that
> >
> > Joe K
> >
> >
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] Behalf Of Chris Chance
> > Sent: Saturday, August 09, 2003 12:14 AM
> > To: '[EMAIL PROTECTED]'
> > Subject: RE: [smartBridges] AP Indoor
> >
> >
> > So does this mean we are actually going to get the ABI link values for
> > the
> > clients FINALLY? I mean I recall asking this like 3 months ago J WOOHOOO
> > I CAN BUY MORE ABI's!!!!! MORE SMALL WIPOPS HERE I COME!
> >
> >
> >
> > Chris
> >
> >
> >
> >
>
> --------------------------------------------------------------------------
--
> > --
> >
> > From: Earl Campbell [mailto:[EMAIL PROTECTED]
> > Sent: Friday, July 18, 2003 4:04 PM
> > To: [EMAIL PROTECTED]
> >
> >
> >
> > The bank would not cash it cause they said it was too big for
> > their
> > machine...and the cancled stamp they have was too small !
> >
> > Earl
> >
> >
> >
> >
> >
> > -------Original Message-------
> >
> >
> >
> > From: [EMAIL PROTECTED]
> >
> > Date: Friday, August 08, 2003 02:25:55 PM
> >
> > To: [EMAIL PROTECTED]
> >
> > Subject: RE: [smartBridges] AP Indoor
> >
> >
> >
> > Nice check! How does it fit in your wallet?
> >
> > seriously, though, I couldn't find a link to show who you need
> > to
> > contact to get a grant like that. Any help? I'd like to get a big
> > check like that too! (and I don't mean size)
> >
> >
> >
> > On Fri, 2003-07-18 at 15:47, Earl Campbell wrote:
> >
> >
> >
> >
> >
> > See my web site http://www.uphi.net and click on grant.
> > Earl UpHi.net
> >
> > -------Original Message-------
> >
> > From: [EMAIL PROTECTED]
> > Date: Friday, August 08, 2003 02:10:29 PM
> > To: [EMAIL PROTECTED]
> > Subject: RE: [smartBridges] AP Indoor
> >
> > Hi Earl and Scott,
> >
> > If you don't mind, would either of you forward the
> > information
> > to me, too?
> >
> > Thanks!
> > Sevak
> >
> > On Fri, 2003-08-08 at 13:06, Scott Damron wrote:
> > Hey Earl,
> >
> > Could you contact me off list concerning the grant you
> > were
> > awarded? I just would like some info from someone who has actually been
> > awarded the money.
> >
> > Thanks,
> >
> > Scott
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Earl Campbell
> > Sent: Friday, July 18, 2003 10:04 AM
> > To: [EMAIL PROTECTED]
> > Subject: RE: [smartBridges] AP Indoor
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > I have a piece of software I cant afford to buy yet
> > and
> > the demo is time limited. I keep resetting the date to make the software
> > demo work. When I buy the software, which I'm gonna do when I get the
> > money, the date and time will be correct. Till then....my own little
> > time warp !
> > Earl - UpHi.net
> > BTW - haven't seen one red cent of the grant money
> > yet.
> > But we did get the legal papers 8-7-03 to fill out and send back.
> > Woh...ya wouldn't believe all the restrictions on the spending of this
> > money! Not to complain... it is a half million dollars any way ya look
> > at it.
> >
> >
> > -------Original Message-------
> >
> > From: [EMAIL PROTECTED]
> > Date: Friday, August 08, 2003 11:25:05 AM
> > To: [EMAIL PROTECTED]
> > Subject: RE: [smartBridges] AP Indoor
> >
> > He is in New Mexico, you never know what might be
> > going
> > on out there!!!
> >
> > Scott
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Proctor
> > Sent: Friday, August 08, 2003 9:50 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: [smartBridges] AP Indoor
> >
> >
> > I just thought Earl was operating in his own little
> > time
> > warp. :)
> >
> > Kevin
> >
> > Zathras' Lackey wrote:
> > Earl,
> >
> > Either your mail is taking an incredibly long time
> > to
> > hit the list or you need to reset the date on your computer.
> >
> >
> >
> >
> > On Friday, Jul 18, 2003, at 11:22 US/Central, Earl
> > Campbell wrote:
> >
> > When can we expect new firmware for the Air Point
> > Indoor units. Its a pain not to see signal strength in SimpleNMS for Air
> > Point Indoor units in the AP mode.
> > Earl - UpHi.net
> >
> >
> >
> >
> >
> > -- Kevin B. ProctorCustomer ServiceInternet SalesElectro-Comm
> > Distributing Inc.5015 Paris St.Denver, CO
> > 80239+1-800-525-0173+1-303-371-8182+1-303-371-8158 FAX+1-800-423-8018
> > [EMAIL PROTECTED] PART-15.ORG smartBridges Discussion List To
> > Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges To Remove: mailto:[EMAIL PROTECTED] (in the body type
> > unsubscribe smartBridges) Archives: http://archives.part-15.org
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ____________________________________________________
> > IncrediMail - Email has finally evolved - Click Here
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ____________________________________________________
> > IncrediMail - Email has finally evolved - Click Here
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ____________________________________________________
> > IncrediMail - Email has finally evolved - Click Here
>
>
> Mike Brownson
> Electro-comm Distributing
> 5015 Paris St, Denver, CO 80239
> (303) 371-8182 (800) 525-0173
>
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
