Dan, Thanks for the input. One of the reasons I was going to go with a 5dbi omni was cause of the Vertical Beam Width. I wanted to get the best possable one so that the clients within a half a mile can get me. Also, The reason for amping was to push out the signal at 36db to power though some of the trees that are around.
Dennis ----- Original Message ----- From: "Dan @ Wyoming.com" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 13, 2003 9:06 PM Subject: Re: [smartBridges] Cost Effective Tower! > I would at least go with a 9dbi omni. Here is the one we have been > using until we put up our 120 sectors. > > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3039990945&category=11175 > > Very inexpensive. > > > On Wed, 13 Aug 2003 20:55:25 -0500 > "Dennis Burgess" <[EMAIL PROTECTED]> wrote: > > I again, am getting ready to install my equipment on a tower. > > We are planing on using a 5db omni with a 1watt amp. However, we do > > also have to install a 19db pacwireless grid antenna on the tower > > also. > > > > Would this work to save cash? > > > > 19db grid backhaul connected to Airbridge Outdoor --> Ethernet > > running down tower into shack --> into switch -- > Into Airpoint > > Indoor (i do belive this has 100mw) --> Power injector for amp --> > > up tower to amp --> 1 foot to omni. > > > > We need to get some cash coming in first then we will upgrade to 180 > > sectors. > > > > Let me know > > > > Dennis > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
