|
Last update even with the good POE I found that
logging in it would let me but would not let me save anything just kept saying
ABO not found even though I was logged into it?? I had to HARD reset the ABO
back to default even though it was already at default now it lets me back in and
change the password SSID etc. The bad POE lets me log in and look as well but
still will not let me save info. Very strange..
----- Original Message -----
Sent: Friday, August 15, 2003 7:24
AM
Subject: Re: [smartBridges] POWER LEDS on
ABOS not functioning
Another update I can now get a semi network
connection with two different POE's yet when I try to upgrade NEW firmware to
the ABO it says AbO not found yet if I say NO to upgrade it lets me log right
in with the default passwords and default Ip of 192.168.0.22????? I have tried
setting lan card to 10 meg 1/2 duplex no better results??
----- Original Message -----
Sent: Friday, August 15, 2003 7:08
AM
Subject: Re: [smartBridges] POWER LEDS
on ABOS not functioning
Correction the POE will work in X mode only and
NOT in straight thru. But what is strange if I hook it direct into a WAN
port and straight thru mode it appears to make the WAN port LEd light up and
I then get LAN LED on ABO?? Yet if I hook to straight thru direct to a PC or
my laptop LAN card it will not function??
----- Original Message -----
Sent: Friday, August 15, 2003 7:01
AM
Subject: [smartBridges] POWER LEDS on
ABOS not functioning
FYI this is the 3rd unit out of 10 that I
have received where he POWER led is not functioning yet all other LEDs
work well and unit seems to be okay? I also have a unit with the POE unit
is bad will not allow LAN to work any suggestions?? Cold solder joint on
the switch possibly??
Thanks
|
