You mentioned you tried to upgrade NEW
firmware to the ABO it says AbO not found. Can you do the firmware upgrade
using FWUpgrade utility manually? Check if you have static ARP entry in your
PC. Remove if any, we don’t need use that method anymore. How strange
that you can login and tell you device not found. Please make sure your PC and
the device is on the same IP subnet and try using the simpleMonitor 1.61?.
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless
Sent: Saturday, August 16, 2003
4:57 AM
To: '[EMAIL PROTECTED]'
Subject: Re: [smartBridges] POWER
LEDS on ABOS not functioning
----- Original Message -----
Sent: Friday,
August 15, 2003 9:47 AM
Subject: RE: [smartBridges]
POWER LEDS on ABOS not functioning
With the bad POE, do you
able to ping to the device nicely? There could be possibility that the RJ45 has
bad termination. Please try to ascertain that the bad POE is really bad before
RMA just the POE.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Blazen Wireless
Sent: Friday, August 15, 2003
10:33 PM
To: '[EMAIL PROTECTED]'
Subject: Re: [smartBridges] POWER
LEDS on ABOS not functioning
Last update even with the good POE I
found that logging in it would let me but would not let me save anything just
kept saying ABO not found even though I was logged into it?? I had to HARD
reset the ABO back to default even though it was already at default now it lets
me back in and change the password SSID etc. The bad POE lets me log in and
look as well but still will not let me save info. Very strange..
----- Original Message -----
Sent: Friday, August
15, 2003 7:24 AM
Subject: Re:
[smartBridges] POWER LEDS on ABOS not functioning
Another update I can now get a semi
network connection with two different POE's yet when I try to upgrade NEW
firmware to the ABO it says AbO not found yet if I say NO to upgrade it lets me
log right in with the default passwords and default Ip of 192.168.0.22????? I
have tried setting lan card to 10 meg 1/2 duplex no better results??
----- Original Message -----
Sent: Friday,
August 15, 2003 7:08 AM
Subject: Re:
[smartBridges] POWER LEDS on ABOS not functioning
Correction the POE will work in X
mode only and NOT in straight thru. But what is strange if I hook it direct
into a WAN port and straight thru mode it appears to make the WAN port LEd
light up and I then get LAN LED on ABO?? Yet if I hook to straight thru direct
to a PC or my laptop LAN card it will not function??
----- Original Message -----
Sent: Friday,
August 15, 2003 7:01 AM
Subject:
[smartBridges] POWER LEDS on ABOS not functioning
FYI this is the 3rd unit out of 10
that I have received where he POWER led is not functioning yet all other LEDs
work well and unit seems to be okay? I also have a unit with the POE unit is
bad will not allow LAN to work any suggestions?? Cold solder joint on the
switch possibly??
|
