RE: [smartBridges] POWER LEDS on ABOS not functioning

[sB Tech Support]

With the bad POE, do you able to ping to the device nicely? There could be possibility that the RJ45 has bad termination. Please try to ascertain that the bad POE is really bad before RMA just the POE.   Alex sB Tech Support       -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless Sent: Friday, August 15, 2003 10:33 PM To: '[EMAIL PROTECTED]' Subject: Re: [smartBridges] POWER LEDS on ABOS not functioning   Last update even with the good POE I found that logging in it would let me but would not let me save anything just kept saying ABO not found even though I was logged into it?? I had to HARD reset the ABO back to default even though it was already at default now it lets me back in and change the password SSID etc. The bad POE lets me log in and look as well but still will not let me save info. Very strange..     ----- Original Message ----- From: Blazen Wireless To: [EMAIL PROTECTED] Sent: Friday, August 15, 2003 7:24 AM Subject: Re: [smartBridges] POWER LEDS on ABOS not functioning   Another update I can now get a semi network connection with two different POE's yet when I try to upgrade NEW firmware to the ABO it says AbO not found yet if I say NO to upgrade it lets me log right in with the default passwords and default Ip of 192.168.0.22????? I have tried setting lan card to 10 meg 1/2 duplex no better results??     ----- Original Message ----- From: Blazen Wireless To: [EMAIL PROTECTED] Sent: Friday, August 15, 2003 7:08 AM Subject: Re: [smartBridges] POWER LEDS on ABOS not functioning   Correction the POE will work in X mode only and NOT in straight thru. But what is strange if I hook it direct into a WAN port and straight thru mode it appears to make the WAN port LEd light up and I then get LAN LED on ABO?? Yet if I hook to straight thru direct to a PC or my laptop LAN card it will not function??     ----- Original Message ----- From: Blazen Wireless To: [EMAIL PROTECTED] Sent: Friday, August 15, 2003 7:01 AM Subject: [smartBridges] POWER LEDS on ABOS not functioning   FYI this is the 3rd unit out of 10 that I have received where he POWER led is not functioning yet all other LEDs work well and unit seems to be okay? I also have a unit with the POE unit is bad will not allow LAN to work any suggestions?? Cold solder joint on the switch possibly??   Thanks