|
Yes I can ping fine??
----- Original Message -----
Sent: Friday, August 15, 2003 9:47
AM
Subject: RE: [smartBridges] POWER LEDS on
ABOS not functioning
With the bad POE, do
you able to ping to the device nicely? There could be possibility that the
RJ45 has bad termination. Please try to ascertain that the bad POE is really
bad before RMA just the POE.
-----Original
Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Blazen Wireless
Sent: Friday, August 15, 2003 10:33
PM
To:
'[EMAIL PROTECTED]'
Subject: Re: [smartBridges] POWER LEDS on
ABOS not functioning
Last update even with the good POE
I found that logging in it would let me but would not let me save anything
just kept saying ABO not found even though I was logged into it?? I had to
HARD reset the ABO back to default even though it was already at default now
it lets me back in and change the password SSID etc. The bad POE lets me log
in and look as well but still will not let me save info. Very
strange..
----- Original Message -----
Sent: Friday,
August 15, 2003 7:24 AM
Subject: Re:
[smartBridges] POWER LEDS on ABOS not functioning
Another update I can now get a
semi network connection with two different POE's yet when I try to upgrade
NEW firmware to the ABO it says AbO not found yet if I say NO to upgrade it
lets me log right in with the default passwords and default Ip of
192.168.0.22????? I have tried setting lan card to 10 meg 1/2 duplex no
better results??
----- Original
Message -----
Sent:
Friday, August 15, 2003 7:08 AM
Subject: Re:
[smartBridges] POWER LEDS on ABOS not functioning
Correction the
POE will work in X mode only and NOT in straight thru. But what is strange
if I hook it direct into a WAN port and straight thru mode it appears to
make the WAN port LEd light up and I then get LAN LED on ABO?? Yet if I
hook to straight thru direct to a PC or my laptop LAN card it will not
function??
----- Original
Message -----
Sent:
Friday, August 15, 2003 7:01 AM
Subject:
[smartBridges] POWER LEDS on ABOS not
functioning
FYI this is the
3rd unit out of 10 that I have received where he POWER led is not
functioning yet all other LEDs work well and unit seems to be okay? I
also have a unit with the POE unit is bad will not allow LAN to work any
suggestions?? Cold solder joint on the switch
possibly??
|
