Alex not all of us know how to read hex or have the time to sit and convert even if we did. We are a business that is on the go 24 /7 and to sit and take time to figure out what Mac has what hex code to what bad chip to look on your site?? if it would be easy to in the future to not have two lines that go into one in the manufacturing process and also do some kind of date code stamping like I have suggested now for the 5th time so this way all someone has to do is just look at the small sticker that tells them month and year within 2 seconds
You will see that this method will save us as well as you time trying to look things up or educate us on stuff.. ----- Original Message ----- From: "sB Tech Support" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, September 04, 2003 12:32 PM Subject: RE: [smartBridges] [good and bad] New aPPo from Singapore Correct. For example, if your aBO has Mac# 00301A 019999 then this is old since it is smaller than 00301A 01E2A6. Remember Mac# is in Hex format. Alex sB Tech Support [EMAIL PROTECTED] -----Original Message----- From: Sam [mailto:[EMAIL PROTECTED] Sent: Friday, September 05, 2003 3:08 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] [good and bad] New aPPo from Singapore Alex, Do the good units have higher MAC addresses than those posted? On Fri, 5 Sep 2003, sB Tech Support wrote: > Looking at the Mac address can tell you whether it is Post-June units. > The list of Mac# has been posted. Post-June units are loaded with new > firmware. > > > > Alex > > sB Tech Support > > [EMAIL PROTECTED] > > > > -----Original Message----- > From: Blazen Wireless [mailto:[EMAIL PROTECTED] > Sent: Friday, September 05, 2003 2:46 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] [good and bad] New aPPo from Singapore > > > > Well pinging something that is not there makes NO sense since it is not > associated? I have been trying to ping a radio now for over an hour and > NO results it is not associated due to the same issue if radios losing > association and I have yet to get any response how we can tell for sure > units that are shipped to us from Electrocomm are in fact units with the > new chip and not something that we have to load the firmware on??? > > > > Seem like this is a question that keeps getting pushed aside. > > > > ----- Original Message ----- > > From: Tom Haynes <mailto:[EMAIL PROTECTED]> > > To: [EMAIL PROTECTED] > > Sent: Thursday, September 04, 2003 11:28 AM > > Subject: RE: [smartBridges] [good and bad] New aPPo from Singapore > > > > It works for an unknown (to me) reason. Not all of the time, but most of > the time. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless > Sent: Thursday, September 04, 2003 1:29 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] [good and bad] New aPPo from Singapore > > I don't understand how pinging a client radio that is not associated to > the AP is going to bring it back to life and re-associate? Maybe I am > missing something here or is this just a fix for the APPO if you can get > to it from the LAN side?? > > > > > > ----- Original Message ----- > > From: Gloria Vester <mailto:[EMAIL PROTECTED]> > > To: [EMAIL PROTECTED] > > Sent: Thursday, September 04, 2003 11:04 AM > > Subject: Re: [smartBridges] [good and bad] New aPPo from Singapore > > > > Yes, they are running very well. I did have one lock up once, night > before last, but I pinged and it came back and has been up ever since. > It was while I was trying to associate a new customer and was getting > interference from a new competitor. > > > > Thank you, > > Gloria > > ----- Original Message ----- > > From: sB Tech <mailto:[EMAIL PROTECTED]> Support > > To: [EMAIL PROTECTED] > > Sent: Thursday, September 04, 2003 11:57 AM > > Subject: RE: [smartBridges] [good and bad] New aPPo from Singapore > > > > Hi Gloria, > > > > Appreciate you could update the status of the 4 aPPO (Post-June) units > from Singapore, have they been running well so far? > > > > Alex > > sB Tech Support > > [EMAIL PROTECTED] > > > > -----Original Message----- > From: Gloria Vester [mailto:[EMAIL PROTECTED] > Sent: Thursday, September 04, 2003 8:42 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] [good and bad] New aPPo from Singapore > > > > I would love to do that - you guys have been so great and supportive, > but I would be afraid they are lurking on this list and see it and I > don't want to risk giving them any reasons to come after me anymore than > they already are. Last night the customer that was seeing their ap was > not able to get online. I was on the phone with him until almost > midnight trying to get him back up, to no avail. I could see his > airBridge for a while, even logged into it from this end. When I did, I > saw two of my aps and one of the other guy's. All three of them had > less than 25% signal strength, so was unable to get the customer back > up. We are going out there tonight when he gets home from work and > changing out his antenna with one that has a tighter beam width. He was > working fine the night before, 100% RSSI on one of our AP's, then when > he got home from work last night and tried to get online, no go. I hope > to get time today to go do some war driving and see if I can find his > ap's. > > > > Thanks guys - I appreciate all the advice and support, > > Gloria > > > > ----- Original Message ----- > > From: Tom Haynes <mailto:[EMAIL PROTECTED]> > > To: [EMAIL PROTECTED] > > Sent: Thursday, September 04, 2003 2:05 AM > > Subject: RE: [smartBridges] [good and bad] New aPPo from Singapore > > > > I hate to say play dirty but they really suck. You might accidently post > their IP range and MAC addresses on here :-) > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Gloria Vester > Sent: Wednesday, September 03, 2003 11:32 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] [good and bad] New aPPo from Singapore > > I don't really know for sure what they are using, simpleMonitor showed > me the MAC address of their ap and I looked it up and found out it is an > Aironet MAC address. When we called them over a month ago to try and > cooperate with them, they told us they were going to be running on > channels 1, 6, & 11. We told them that we were running on channels 1, > 4, 8, & 11 and asked them if they could change their channels, they > basically said they would do what they want, wherever they want, and it > is our problem, not theirs. Even when we told them, nicely, that we > were here first, we already had customers online on those channels, they > didn't give a s**t. I may be over reacting too soon, but I am going by > the attitude they gave us when we talked to them. There seemed to be > absolutely no interest on their part to get along or cooperate or share > the spectrum. > > > > Gloria > > > > ----- Original Message ----- > > From: Pascal Losier <mailto:[EMAIL PROTECTED]> > > To: [EMAIL PROTECTED] > > Sent: Wednesday, September 03, 2003 11:09 AM > > Subject: RE: [smartBridges] [good and bad] New aPPo from Singapore > > > > Is the aironet of your competitor FHSS or DSSS ??? > > > > > > > > > > ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
