When I installed our first Smartbridges link, I was very troubled with all the talk on the list. Of course this seemed to really escalate right after I put in the order.
Once I installed everything (after a 3 day burn-in) I was very impressed with the rock solid stability. < 3 or 4 weeks pass > Now I'm pulling my hair out. I'm driving 40 miles round trip approximately every other day to reset the distant end of a PTP link. Absolutely, positively NOTHING has changed since the hardware was installed. It's an APPO <-> ABO link. The APPO only has the one association and the ABO is plugged directly into a router and only sees one IP on the ethernet side. I have to power cycle it to bring it back up. I've never touched the config since I first set it up. Firmware versions; APPO Ver. 1.4j.6 ABO Ver. 0.01.04 This is creating some very unhappy customers and one extremely unhappy WISPer. Is there anyone that can offer any suggestions? Are these units really somehow behaving differently over time? I just got back from resetting the link again and the temperature outside is 64deg. That would make most electronics fairly happy by my estimate. What can I do? Scott ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
