----- Original Message ----- From: "Blazen Wireless" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, September 27, 2003 1:50 PM Subject: Re: [smartBridges] Slow down problems
> DO you have the client units set to 10 meg 1/2 duplex? I know that you can > change that in the Canopy stuff I wonder if that could be the problem eyt I > don't see any collisions being noted in the SB equipment when you look at > statistics? I am going to change the canopy to 10 meg right now and see what > happens. Also I changed all my clients associated to one APPO to 5.5 megs > and left the APPO at 11 megs and down to see what happens.. That way a > client cant force the APPO to 11 meg at least on this one particular APPO.. > I left the Canopy SM's to autonegotiate. I do not have any SM's that go directly to Airbridge APPO's though I do have ones that go directly to Cisco 350 APs. Where I have APPO's connected to Canopy it is through either Netgear, Linksys, or the Canopy CMM switches. I have not tried a Canopy SM directly to a APPO only because that configuration has never come up - I think it would work fine though I would probably lock the Canopy to 10M 1/2 duplex. Mark ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
