Okay I see you have it set like me canopy (SM) for BH to the switch then from the switch there are two other APPO's hooked up.
What I did notice here with my replacement APPO (Thanks Kevin Ecom) is that when I hook the APPO direct to a linksys switch it comes up at 10 megs FULL DUPLEX!!! I wonder if the Dlink up at the tower is doing the same thing but would that not show collisions in the APPO's that were already up there?? And why would the Linksys show it as 10 full? instead of half duplex is this a problem with the linksys or is this an issue with the APPO / ABO's??? ----- Original Message ----- From: "Mark Radabaugh" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, September 27, 2003 12:40 PM Subject: Re: [smartBridges] Slow down problems ----- Original Message ----- From: "Blazen Wireless" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, September 27, 2003 1:50 PM Subject: Re: [smartBridges] Slow down problems > DO you have the client units set to 10 meg 1/2 duplex? I know that you can > change that in the Canopy stuff I wonder if that could be the problem eyt I > don't see any collisions being noted in the SB equipment when you look at > statistics? I am going to change the canopy to 10 meg right now and see what > happens. Also I changed all my clients associated to one APPO to 5.5 megs > and left the APPO at 11 megs and down to see what happens.. That way a > client cant force the APPO to 11 meg at least on this one particular APPO.. > I left the Canopy SM's to autonegotiate. I do not have any SM's that go directly to Airbridge APPO's though I do have ones that go directly to Cisco 350 APs. Where I have APPO's connected to Canopy it is through either Netgear, Linksys, or the Canopy CMM switches. I have not tried a Canopy SM directly to a APPO only because that configuration has never come up - I think it would work fine though I would probably lock the Canopy to 10M 1/2 duplex. Mark ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
