----- Original Message ----- From: "Blazen Wireless" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, September 27, 2003 3:47 PM Subject: Re: [smartBridges] Slow down problems
> Okay I see you have it set like me canopy (SM) for BH to the switch then > from the switch there are two other APPO's hooked up. > > What I did notice here with my replacement APPO (Thanks Kevin Ecom) is that > when I hook the APPO direct to a linksys switch it comes up at 10 megs FULL > DUPLEX!!! > > I wonder if the Dlink up at the tower is doing the same thing but would that > not show collisions in the APPO's that were already up there?? > > And why would the Linksys show it as 10 full? instead of half duplex is this > a problem with the linksys or is this an issue with the APPO / ABO's??? > I would expect if one end is Full and the other Half (AFAIK APPO's will not do full duplex) I would expect really crappy performance. Why a Linksys or DLINK would see it as full is something of a mystery to me. Dig around in the junk pile and find an old 10Mb hub and stick it in and see if it helps. Your not really going to tell me you have a DLINK anything 200' in the air that you have to pay somebody to get to are you? Mark ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
