I am working on the Atmel/smartBridges SNMP guide book. I still need to work out a few parts and actually put the rest of the information I have compiled in to the doc. I will release it when I have a few more sections done.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lars Gaarden Sent: Friday, October 10, 2003 7:52 PM To: [EMAIL PROTECTED] Subject: [smartBridges] Management tools (Was: aBT w/N connector - Pocket PC simpleMonitor) Nimesh D. Parikh wrote: > We are experimenting with open source tool NetSNMP. It looks quite > promising. So just hang in there and we may be able to give you guys a > good solution. Nish, some of us will be perfectly happy with a complete MIB that has sufficient documentation and actually validates. To give a couple of examples - the documentation on how to pull client rssi/lq information from the AP is nonexistent in the latest MIB - it has to be reverse engineered from network traces. The same with the dial-a-power (CR31?) settings. -- LarsG ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
